Product Details
Basic Information:
- Product Size:
- 270*110*1200(1100)MM/184+200MM φDiameter
- Lenses:
- Transparent&Flat/Cobweb&Curved
- Wavelength:
- 630±5nm(R), 590±5nm(Y), 505±5nm(G)
- Input Voltage:
- 12-24VDC Or 110-220VAC
- Light Source:
- 5MM Diameter LED
- Communicate:
- Self-Learn/RS485 Real-Time
- Power Factor:
- ≥0.85 @ 25℃
- Power Consumption:
- <3W Per Lamp
Product Details:
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
4-Aspect Detachable Traffic Light Body: 270*110*1200(1100)MM
Customizable Traffic Light Optics:Customize Your Voltage From 12-24VDC And 110-220VAC
![]() |
![]() |
|---|---|
| 200MM(8 Inch) Traffic Light with 4-Aspect Double 3-Color Arrow Traffic Light Semaphore, 4 aspect/section as 200MM*4/204 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height: 1200MM/1100MM(No Bracket) | Detachable visior: 155MM length |
200MM(8 Inch) Led Traffic Lights with 4-Aspect Double 3-Color Arrow Traffic Light Semaphore is one kind of our Vehicle Traffic Light series, which often includes ball/arrow vehicle traffic light and its additional traffic light countdown timer,reminding any driver when to go or stop for any crossing.
200MM(8 Inch) Led Traffic Lights with 4-Aspect Double 3-Color Arrow Traffic Light Semaphore has 4 detachable traffic light bodies, and these 4 aspects are connected by its long bolts and nuts as a whole body, while each traffic light body can be easily added or removed by such bolts and nuts.
200MM(8 Inch) Led Traffic Lights with 4-Aspect Double 3-Color Arrow Traffic Light Semaphore has 3 separate statuses, including red traffic light time for stop, yellow traffic light time for caution, and green traffic light time for go.
Using a double-arrow signal for multi-direction control
Model NJGQ-FXFX-200-4YS/FS3 is a 200mm four-aspect signal that combines two three-color arrow groups in one housing. It is intended for junctions or controlled lanes where two directional movements need separate red, yellow and green instructions. The compact 200mm optics help control the overall housing size while retaining independent arrow information. UV-resistant PC housing and LED modules are available with flat transparent or curved cobweb lenses.
Configuration before production
Arrow orientation is the most important ordering detail. The factory needs to know whether each group points left, right, straight ahead or uses another approved symbol, and how the two groups should be arranged vertically. The electrical version can be supplied for 12–24V DC or 110–220V AC. If the installation includes a timer or central communications, specify self-learning or RS485 requirements together with the controller sequence.
What to confirm before ordering
- Direction and color sequence for both arrow groups, including inactive-phase appearance.
- Controller output voltage and whether each arrow color requires an independent circuit.
- Mounting order, housing orientation, lens type and bracket spacing.
- Project drawings or a phase chart so the manufactured face matches the lane plan.
Helpful resources: Compare 200mm traffic lights Match a traffic controller Review installation requirements Request a project quotation.
Related Products
led traffic light & led traffic light controller, whether it is normal power or solar power, portable or mobile, normal or solar warning traffic light, all kinds of traffic signal board, as well as light poles.









