本页的完整译文正在准备中。部分内容暂以原文语言显示。
200mm traffic signal heads, LED modules and replacement parts
Start with the assembly you need. A complete 8-inch LED traffic light, a replacement LED module and an empty housing are different purchase items. Use the product drawing and parts list to confirm what is included.
- Three-aspect red, yellow and green ball signal: compare a complete 200mm vehicle signal head.
- 200MM交通信号灯LED模组: review the replacement module before matching it to an existing housing.
- 200mm traffic signal selection checklist: prepare the indication, supply version and mounting requirements.
For a manufacturer quotation, send the model URL, quantity, destination and required components to sky-sale@njgq.net. Include front, rear and label photographs for a replacement order. Compare the 300mm / 12-inch range only against the size required by your project specification.
Find a signal configuration or replacement component
These catalogue links help compare indications and component scope across the range. Confirm the selected model drawing, electrical version and supplied parts before ordering.
Arrow and lane-control traffic signals
- 200mm red/yellow/green arrow signal, two aspects
- 200mm red-cross / green-arrow tunnel signal
- 200mm red/green arrow signal
- 200mm red-cross / green-arrow two-aspect signal
- 200mm arrow signal, selectable colour arrangement
- 200mm red-cross / green-arrow lane-control signal
Signal housings, LED module parts and brackets
- Aluminum bracket for 200mm LED traffic lights
- 200mm two-section signal housing
- 200mm single-section plastic housing parts
- 200mm traffic light LED module plastic parts
Round, warning and stop/go signal configurations
200mm Traffic Light Selection
Choose a 200mm (8-inch) signal by indication, voltage and mounting arrangement. For replacement orders, include the existing label, dimensions and wiring details in your enquiry.
Compare 200mm configurations and prepare your quote
| 供货范围 | Published example | Confirm for your order |
|---|---|---|
| Complete signal head | Three-aspect red, yellow and green ball head | Rated voltage version, controller output, mounting drawing and indication sequence. |
| Housing / repair parts | Four-section 200mm housing | Body dimensions, module fit, bracket and the exact components included. |
Nominal 200mm diameter identifies the size class. Check the housing and module drawings for fit. The quoted electrical version must match your supply and controller.
Send these details for a quotation
- Signal head, LED module or housing; indication and number of sections.
- Required voltage and controller model or output specification.
- Mounting drawing; front, rear and label photos for a replacement.
- Quantity, destination and required delivery date.
下载询价清单 · Compare 200mm and 300mm sizes · Check wiring requirements
Factory and packing photographs show published factory material. Ask for documents matching your selected model and order.
产品
2灯头红黄绿箭头LED交通信号倒计时器 
200MM(8英寸) 4灯头交通信号灯维修替换外壳 
200MM(8英寸)4灯头红黄圆形满屏及绿绿箭头2方向LED交通信号灯 
200MM(8 英寸) — 4灯头红黄圆形满屏及双绿箭头2相位LED交通信号灯 
200MM(8英寸) 4灯头红黄绿圆形满屏及3合1箭头LED交通信号灯 
200MM(8英寸) 4灯头双3色箭头LED交通信号灯 
200MM(8英寸) 4灯头双3色箭头交通信号灯 
200MM(8英寸)4灯头3色箭头交通信号倒计时器 
200MM(8 英寸) — 4灯头蛛网透镜LED交通信号灯，带倒计时显示器 
200MM(8 英寸) — 4灯头红黄绿圆形满屏LED交通信号倒计时器 
200MM(8英寸)3灯头隧道及地下通道LED交通信号倒计时器 
200MM(8英寸) 3灯头标准行人LED交通信号倒计时灯 
200MM(8 英寸) — 3灯头红绿蛛网透镜LED交通信号灯，带倒计时显示器 
200MM(8英寸) 3灯头红绿圆形满屏LED交通信号倒计时灯 
200MM(8英寸)3灯头红绿箭头交通信号倒计时器 
200MM(8 英寸) — 3灯头红绿圆形满屏LED交通信号灯，带倒计时显示器 
200MM(8英寸)3灯头红黄绿双向箭头LED交通信号灯 
200MM(8 英寸) — 3灯头箭头交通信号灯 
200MM(8 英寸) — 3灯头蛛网透镜LED交通信号灯 
200MM(8英寸)3灯头红黄绿圆形满屏LED交通信号灯 
200MM(8 英寸) — 2灯头方形红绿行人LED交通信号灯 
200MM(8英寸) 2灯头红绿行人LED交通信号倒计时灯 200MM(8 英寸) — 2灯头红黄绿箭头交通信号灯，带倒计时显示器 
200MM(8英寸) 2灯头红黄绿圆形满屏LED交通信号倒计时灯 Selecting a 200mm LED traffic light
A 200mm traffic light is also described as an 8-inch signal. This is the nominal signal face size, not the total housing height or bracket spacing. Compare the indication, number of aspects and mounting arrangement in each product listing. A complete signal head and a replacement LED module are different supply items. For a module replacement, provide the existing model label, connector photographs and fixing dimensions. For a complete assembly, include the required input voltage, controller connection and installation drawing. Confirm the chosen configuration in the quotation before ordering.