Product photographs Click to enlarge ↗
Round / full-ball signals / 300 mm
300mm High-Power LED Full Ball Traffic Light — Yellow Housing
300mm three-aspect high-power LED full ball traffic light with red, amber and green indications, shown in a yellow housing.
- Signal indication
- Red / amber / green
- Housing material
- 100% polycarbonate (PC)
- Supply options
- 190–265 V AC; 12 V DC; 32–42 V AC; 24 V DC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Nominal face diameter | 300mm |
|---|---|
| Light source | High-power LED |
| Indication type | Full ball / circular |
| Signal indication | Red / amber / green |
| Number of aspects | 3 |
| Aspect arrangement | Vertical |
Electrical & control
| Power per illuminated aspect | 8 W |
|---|---|
| Supply options | 190–265 V AC; 12 V DC; 32–42 V AC; 24 V DC |
Housing & installation
| Ingress protection | IP65 |
|---|---|
| Operating temperature | −40°C to +60°C |
| Housing material | 100% polycarbonate (PC) |
| Housing colour | Yellow |
A closer look
Indications and assembly
300mm three-aspect high-power LED full ball traffic light with red, amber and green indications, shown in a yellow housing.
The listed configuration uses a yellow 100% polycarbonate (PC) housing with 3 vertically arranged aspects. The nominal 300mm face diameter is distinct from the overall assembly and mounting dimensions.
Electrical versions
Select one of the listed supply-voltage versions when ordering. These are separate electrical configurations; one unit does not accept all listed AC and DC supplies.
The 8 W figure applies to one illuminated aspect. It is not the complete assembly consumption in every operating phase. Confirm the load schedule and controller connections against the selected version.
Housing and project documentation
The source specification lists IP65 ingress protection and an operating temperature of −40°C to +60°C. Request the model drawing and applicable inspection documents for the installation and destination market.
Product photography
Workshop photographs and prepared product illustrations show the assembly and indications. Images with multiple colors illuminated are for product display, not an operating signal phase or photometric measurement.
Selection & installation
Define the required configuration
Confirm the red, amber and green circular indications, aspect order and viewing direction. Specify the nominal diameter, housing colour and selected supply on each order line.
Check the installation interface
Provide the mounting drawing, fixing positions, controller interface and cable requirements. For replacement work, include the existing unit label and photographs of the mounting and connections.
Supporting selection guides
High-power LED signal specification guide · AC and DC supply-version guide
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
