Product photographs Click to enlarge ↗
Pedestrian signals / 200 mm
200mm High-Power LED Pedestrian Signal
Two-aspect 200mm high-power LED pedestrian signal with red standing and green walking figures. Multiple supply-voltage versions are available; specify the required electrical version when ordering.
- Signal indication
- Red standing person / green walking person
- Housing material
- 100% polycarbonate (PC)
- Supply options
- 190–265 V AC; 12 V DC; 32–42 V AC; 24 V DC; 110 V AC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
For a crossing application, specify the pedestrian symbol, its orientation and the required red/green arrangement. The approved crossing design and controller timing plan determine the operating sequence.
Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Nominal face diameter | 200mm |
|---|---|
| Light source | High-power LED |
| Indication type | Pedestrian symbols |
| Signal indication | Red standing person / green walking person |
| Number of aspects | 2 |
| Aspect arrangement | Vertical |
Electrical & control
| Power per illuminated aspect | 7 W |
|---|---|
| Supply options | 190–265 V AC; 12 V DC; 32–42 V AC; 24 V DC; 110 V AC |
Housing & installation
| Ingress protection | IP65 |
|---|---|
| Operating temperature | −40°C to +60°C |
| Housing material | 100% polycarbonate (PC) |
| Housing colour | Black |
A closer look
Indications and assembly
Two-aspect This product with red standing and green walking figures. Multiple supply-voltage versions are available; specify the required electrical version when ordering.
The listed configuration uses a black 100% polycarbonate (PC) housing with 2 vertically arranged aspects. The nominal 200mm face diameter is distinct from the overall assembly and mounting dimensions.
Electrical versions
Select one of the listed supply-voltage versions when ordering. These are separate electrical configurations; one unit does not accept all listed AC and DC supplies.
The 7 W figure applies to one illuminated aspect. It is not the complete assembly consumption in every operating phase. Confirm the load schedule and controller connections against the selected version.
Housing and project documentation
The source specification lists IP65 ingress protection and an operating temperature of −40°C to +60°C. Request the model drawing and applicable inspection documents for the installation and destination market.
Product photography
Workshop photographs and prepared product illustrations show the assembly and indications. Images with multiple colors illuminated are for product display, not an operating signal phase or photometric measurement.
Selection & installation
Define the required configuration
Confirm the red standing and green walking symbols, viewing direction and crossing control sequence. Specify the nominal diameter, housing colour and selected supply on each order line.
Check the installation interface
Provide the mounting drawing, fixing positions, controller interface and cable requirements. For replacement work, include the existing unit label and photographs of the mounting and connections.
Supporting selection guides
High-power LED signal specification guide · AC and DC supply-version guide
Let’s confirm the right version.
Send the product reference with these details:
- Crossing symbols and viewing direction
- Required sequence and countdown interface
- Required quantity, destination and project documentation
