جارٍ إعداد الترجمة الكاملة لهذه الصفحة. يُعرض بعض المحتوى بلغته الأصلية.

الطراز:	NJGQ-DGDB-8000-6000
Body_Material:	Steel Q235
الميزات:	Hot Dip Galvanized Antirust + Plastic Coated
Running_Time:	اختياري
الاتصال:	اختياري
مصدر التغذية:	اختياري

اتصل بنا

تفاصيل المنتج

المعلومات الأساسية:

أبعاد المنتج:	80003603006MM+60002201204MM
Solar_Panel：	اختياري
استهلاك القدرة:	اختياري
تيار التشغيل:	اختياري
الشهادات:	CE(EMC+LVD) China National Standard(GB14887-2011/2016)
الضمان:	10 Years

تفاصيل المنتج:

Single Arm Design: Multiple Functions For Adding Traffic light And Street Light

Octagon Shape Design: Stronger And More Beautiful Than Round Shape Design

Hot Dip Galvanized: Antirust And Long Term Use


6M Octagon Light Pole With 6M Arm, Vertical Main Pole & Horizontal Arm Pole
Length:8000/6000MM	Bottom Flange: 550*20MM With 8 Holes
Width: 360-300/220-120MM	Top Flange: 500*25MM with 6 holes
Thickness: 6/4MM	Foundation Cage: Additional Charge

8M Traffic Light Pole With 6M Arm is one type of our typical single arm traffic light pole,

which can be added with traffic light and pedestrian traffic light and traffic light controller, making a whole complete traffic light system.

8M Traffic Light Pole With 6M Arm has its long arm, so you can easily add any traffic light and traffic signal board on it, while its main pole can add any pedestrian traffic light and traffic light controller.

8M Traffic Light Pole With 6M Arm has hot dip galvanized process for antirust and long term use outside, so no worry about its appearance and stability in tough weather.

Traffic light poles are normally long, which are very hard for air shipping. The best way is to ship by sea and by full container. So it’s better to order in large quantity, especially for one container to save your shipping cost.

أرسل رسالتك إلينا

Pole, arm and foundation coordination

Pole height and arm reach describe the installation geometry, but the foundation and structural design also depend on the equipment attached to them. List the signal heads, signs, luminaires and any solar components with their positions. The completed loading arrangement should be checked for the project location before fabrication is confirmed.

Compare the mounting drawing with the flange, anchor-bolt pattern and cable route at the site. Clarify whether the foundation cage, fixings and equipment brackets are included. For transport, confirm the longest section, packing method and unloading arrangements so the delivered pole can be handled without damaging its finish.

تفاصيل يجب تأكيدها في الطلب

الأبعاد الواردة في الكتالوج: 8000*360*300*6MM+6000*220*120*4MM. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.

معلومات الاستفسار

Attached equipment, positions and project structural requirements.
Flange and anchor layout, cable access and foundation scope.
Arm orientation, packing dimensions and available unloading equipment.

منتجات ذات صلة

إشارات مرور LED ووحدات التحكم بها، بتغذية تقليدية أو شمسية، محمولة أو متنقلة، وأضواء تحذير تقليدية أو شمسية، ومختلف لوحات الإشارات المرورية وأعمدة الإنارة.

9M Street Light Pole With 1.5M Arm

8M Traffic Light Pole With 6M Arm

6M Octagon Light Pole With 6M Arm