Some source specifications are awaiting confirmation. Please confirm the selected configuration with us.
Product photographs Click to enlarge ↗
LED modules / 100 mm
100MM(4 Inch) Traffic Light LED Module
Request the applicable certification and inspection documents for the selected model and destination market.
- Signal indication
- Red/Yellow/Green Ball, Single Color
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select an LED module by its indication, electrical version and mechanical fit. For replacements, compare the existing module label, connector, fixing points and rear clearance; nominal diameter alone does not establish compatibility.
Product reference: 4 Inch Traffic Light LED Module. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red/Yellow/Green Ball, Single Color |
|---|---|
| LED quantity | 26PCS/R+26PCS/Y+26PCS/G |
| Display / housing shape | Round With Ball Design |
| Lens design | Transparent & Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 120*120*70MM/100MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 4 Inch Traffic Light LED Module |
|---|---|
| Two-digit display option | No |
| One-digit display option | No |
| Warranty reference | 5 Years |
A closer look
This product is the inner part of our 100MM LED traffic light, which also includes 100MM housing body as its outer part, these 2 parts together make one whole piece of our 100MM traffic light
100MM(4 Inch) diameter is a kind of mini size traffic light, common for small road, parking lot and car washing station, as well as teaching tools.
| Traffic Light LED Module 100MM(4 Inch) NJGQ-DX-100-1YS1 | |
| Length: 70MM | Steel bracket: 125MM*145MM |
| Width: 70MM | Top bracket and bottom bracket as one set |
| Heright/Thickness: 70MM | Integrated visior: 40MM length, non-detachable |
Small Mini Size Design: 120*120*70MM
Selection & installation
Replacement module and housing compatibility
A replacement LED module must match the existing signal assembly mechanically, electrically and optically. Compare the module outside dimensions, fixing points, connector and supply information with the installed part. A nominal lens diameter or the same displayed color is not sufficient evidence that two modules are interchangeable.
For maintenance orders, provide photographs of the original module, rear connection and housing label together with measured fixing dimensions. Confirm whether the lens, gasket, driver and mounting hardware are part of the supplied module or are reused from the existing signal. Agree the inspection and functional check before ordering a larger replacement batch.
Details to confirm on the order
- Catalogue dimensions
- 120*120*70MM/100MM Diameter. Compare the fixing positions, rear clearance and lens interface with the existing assembly. Confirm which dimensions refer to the supplied component rather than the complete signal.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Existing module reference, electrical input and connector details.
- Mounting pattern, available depth and lens or gasket interface.
- Required color or symbol and the agreed scope of supplied parts.
Let’s confirm the right version.
Send the product reference with these details:
- Existing module label and connector
- Fixing points, clearance and required indication
- Required quantity, destination and project documentation
