Product photographs Click to enlarge ↗
Warning & flashing lights / 200 mm
2-Aspect Traffic Warning Light With Yellow Cobweb Lens
2-Aspect Traffic Warning Light With Yellow Cobweb Lens is part of our Traffic Warning Light Series
- Signal indication
- Red Ball+Green Ball
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Define the required warning pattern and the operating arrangement for the site. Where several units work together, confirm their sequence, synchronization and installation positions.
Product reference: 2-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red Ball+Green Ball |
|---|---|
| LED quantity | 126PCS/R+126PCS/G |
| Display / housing shape | Round With Ball |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*650(550)MM/184+200MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 2-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Double Lens Design: Inner Bulb Lens+Outer Cobweb Lens For Max Brightness
200MM*2 2-Section Detachable Traffic Light Body: 270*110*650(550)MM
| 2 Aspect/Section Traffic Warning Light With Yellow Cobweb Lens, as 8 Inch(200MM)*2/202 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 650MM | Detachable visior: 155MM length |
2 Aspect/Section Traffic Warning Light With Yellow Cobweb Lens is one kind of our Traffic Warning Light Series, which can have 110V-220VAC or 12-24VDC power supply or solar power supply. It will caution any driver and pedestrian to be careful on road.
2 Aspect/Section& Traffic Warning Light With Yellow Cobweb Lens can be customized to have any warning programs as you wish, such as sequential flashing program as frequent flashing in turn, synchronized flashing program as all regular flashing at the same time.
For its power source,it has many options according to your real requirements: alternating current power supply from 110V to 220V, direct current power supply from 12-24V, as well as solar power supply from 12VDC to 24VDC.
Selection & installation
Warning indication and flashing control
Specify the warning function, viewing direction and required flash behavior before selecting the lamp arrangement. Confirm whether the flashing control is included or provided by external equipment, and show how each yellow indication will be connected. The warning head should follow the approved site arrangement rather than a vehicle red-and-green phase schedule.
For the cobweb-lens version shown here, check the selected optics and mounting direction against the project requirements. Review the power supply, switching or flasher interface and cable route together. In replacement work, provide a photograph of the existing warning head and its connections so the bracket and control arrangement can be compared.
Details to confirm on the order
- Catalogue dimensions
- 270*110*650(550)MM/184+200MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Yellow-indication arrangement and the required flash behavior.
- Selected supply version and the internal or external flasher.
- Viewing direction, mounting bracket and the existing cable connection.
Let’s confirm the right version.
Send the product reference with these details:
- Flash pattern, sequence and unit quantity
- Power source, operating schedule and mounting
- Required quantity, destination and project documentation
