Gaoqiao home

22-Output Wire Traffic Controller With Cabinet

22-Output Wire Traffic Controller With Cabinet
Model Number: Traffic Controller Cabinet, NJGQ-XHJJG-22-YX220
Body Material:Powder-Coated Galvanized Sheet Steel
Feature:Small Size + Outdoor Cabinet
Power_Supply:220VAC±10%, 50~60Hz
power_consumption:<0.2W/system
CONTACT US

Product Details

Basic Information:

Product Size:480*370*810MM+335*255*155MM
power_consumption :<0.2W/system
Drive_Current:≤8A/output
certificate:CE&IP65
Warranty:5 Years

Product Details:

Powder-Coated Galvanized Sheet Steel Housing: 335*255*155MM For Small Size And Tough Use

Large Outdoor Cabinet: 480*370*810MM With Slope Design For Waterproof

2 Wiring Terminal: Simple And Easy For Smoothly Wiring

22-Output And 4-Phase: 4 Phases For 4 Different Directions By 22 Outputs

22-Output Wire Traffic Controller With Cabinet, NJGQ-XHJJG-22-YX220
Length: 335MM/480MM  Button Design For Easy Operation
Width: 255MM/370MM  22-Output+4-Phase
Height: 155MM/810MM  Large Outdoor Cabinet  
22-Output Wire Traffic Controller With Cabinet is one type of our traffic controller system, which includes wire traffic controller and wireless traffic controller, as well as all connected traffic lights by wire or wireless.
22-Output Wire Traffic Controller With Cabinet has its powder-coated galvanized sheet steel housing with an 335*255*155MM mini size, so it is long life use and easy portable.
22-Output Wire Traffic Controller With Cabinet only has 2 wiring terminals, one is for East and West directions together and another is for South and North directions.
22-Output Wire Traffic Controller With Cabinet has 22 outputs at max, which means it can separately connect with 22 traffic light lamps at least.
22-Output Wire Traffic Controller With Cabinet has its large outdoor cabinet at 480*370*810MM size. Its slope design at top part is good for heavy rain protection, because both sides are 790MM height and the part near middle is a little heigher at 810MM.

Send your message to us

Controller channels and phase planning

Start with a channel schedule showing every lamp output and the movement it controls. An output count describes connection channels; it does not by itself define the number of junction approaches or a safe phase plan. Keep pedestrian calls, arrow movements and countdown interfaces explicit in the proposed wiring schedule.

Before selecting the controller, compare the lamp supply, load per channel and required switching arrangement with its terminal diagram. Provide the intended sequence, clearance intervals and any external inputs for review. Confirm the startup condition and fault response with the supplier and the project engineer before the unit is installed.

Details to confirm on the order

Published current reference
≤8A/output. Confirm the applicable load conditions and complete wiring diagram for the selected version before assigning connected equipment to its terminals.

Information for your enquiry

  • Lamp quantity and electrical load connected to each output.
  • Required stages, external inputs and any countdown communication.
  • Terminal layout, cabinet space and the approved commissioning sequence.

Request a quotation

Tell us what you need. Include your signal type, lens diameter, voltage and quantity to help us understand your application.

sky-sale@njgq.net
Project inquiry / en