300MM*2 Traffic Light & 3000MM Gate Arm As Automated Flagger

Model Number:	Automated Flagger NJGQ-JD-300-2YS2-YDDZ24
Body Material:	Die Cast Iron+PC Plastic
LED Module:	UV PC Plastic & Electronics, 300MM Traffic Light
LED Color:	Green Yellow Ball
LED Number:	120PCS/R+120PCS/Y
Power Supply:	24V 50Ah Battery(Parallel Connection)

Product Details

Basic Information:

Product Size:	1560*1660MM Body/φ254MM Diameter PCB
Solar Panel：	100Wp Solar Panel
Running Time:	5 Rainy Days(120 Hours) Without Charging
Communicate:	Wireless 433MHz Within 1000M
Light Source:	5MM Diameter LED
Working Mode:	Red Light+Arm Down→Yellow Flash+Arm Up
Power Factor:	≥0.85 @ 25℃
Power Consumption:	＜3W Per Lamp
Certificate:	CE&IP65
Warranty:	5 Years

Product Details:

Auto Barrier Gate: Up And Down By Small Remoter
Trailer With 4 Wheels：Easy Movable And Mobile

2 Traffic Light Heads: One Red Light For Stop and Another Yellow Light For Go

Inbuilt Slolar Traffic Light Controller: Stand-Alone Or Work With Another By Wireless


300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger
Length:1560MM	Inbuilt Solar Panel And Battery As Power Source
Width: 1660MM	Inbuilt Solar Traffic Light Controller As Control Center
Height: 3000MM Gate Arm	2 Sets Work As A Pair Or Each Works Alone

300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger is an extension to our traffic light trailer series, it has its mobile traffic light trailer and auto barrier gate for temporary traffic control at certain area.

300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger has 300MM*2 traffic light, including red traffic light for stop and yellow flashing traffic light for go.

300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger also has its auto barrier gate, so its 3000MM long arm can work together with traffic light. When the gate arm is down, its traffic light is red.

300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger additionally has a 4-wheel trailer as its base part, such 4 wheels makes it movable and moblie, so you can easily take and set up at anywhere for temporary traffic control by your own car.

As a whole set of automated flagger system, it can work alone by its inbuilt solar traffic light controller, or work with another one within 1000M by wireless communication as a pair, working in turn or synchronization.

Send your message to us

Temporary installation and operating plan

A mobile signal should be specified as a complete temporary installation: signal head, support, power supply and control arrangement. Establish the traffic movements to be managed and the required stop and clearance sequence before positioning equipment. Lens size or portability alone cannot determine whether the arrangement is appropriate for a particular work zone.

Check the support on the proposed surface and allow space for equipment access, transport and maintenance. If units operate as a pair, confirm their roles, synchronization and response to communication loss. For solar or battery operation, provide the daily duty cycle and local charging conditions so autonomy can be assessed for the chosen configuration.

Details to confirm on the order

Catalogue dimensions: 1560*1660MM Body/φ254MM Diameter PCB. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.