Полный перевод этой страницы готовится. Часть содержимого отображается на языке оригинала.

9M Street Light Pole With 1.5M Double Arms

Модель:	NJGQ-DGDB-9000-1500*2
Body_Material:	Steel Q235
Особенности:	Hot Dip Galvanized Antirust + Plastic Coated
Running_Time:	Опция
Связь:	Опция
Питание:	Опция

СВЯЖИТЕСЬ С НАМИ

Описание изделия

Основные сведения:

Размеры изделия:	9000603.75MM+1500603.75MM*2
Solar_Panel：	Опция
Потребляемая мощность:	Опция
Ток нагрузки:	Опция
Сертификаты:	CE(EMC+LVD) China National Standard(GB14887-2011/2016)
Гарантия:	10 Years

Описание изделия:

Double Arm Design: Multiple Functions For Adding Solar & Normal Powered Street Light

Round Shape Design: Beautiful Shape For Outside Use At Lower Cost

Hot Dip Galvanized: Antirust And Long Term Use


9M Street Light Pole With 1.5M Double Arms, 1 Vertical Main Pole+2 Horizontal Arm Poles
Length:9000/1500MM	Bottom Flange: 350*16MM with 4 holes
Width: 60/60MM	Top Flange: 350*16MM with 4 holes
Thickness: 3.75/3.75MM	Foundation Cage: Additional Charge

9M Street Light Pole With 1.5M Double Arms is one type of our typical double arm street light pole,

which can be added with solar and normal powered street light, making a whole complete street light system.

9M Street Light Pole With 1.5M Double Arms has its long arm, so you can easily add any solar and normal powered street light on it, while its vertical main pole can hold its controller and carbinet with battery inside.

9M Street Light Pole With 1.5M Double Arms has hot dip galvanized process for antirust and long term use outside, so no worry about its appearance and stability in tough weather.

Street light poles are normally long, which are very hard for air shipping. The best way is to ship by sea and by full container. So it’s better to order in large quantity, especially for one container to save your shipping cost.

Отправьте нам сообщение

Pole, arm and foundation coordination

Pole height and arm reach describe the installation geometry, but the foundation and structural design also depend on the equipment attached to them. List the signal heads, signs, luminaires and any solar components with their positions. The completed loading arrangement should be checked for the project location before fabrication is confirmed.

Compare the mounting drawing with the flange, anchor-bolt pattern and cable route at the site. Clarify whether the foundation cage, fixings and equipment brackets are included. For transport, confirm the longest section, packing method and unloading arrangements so the delivered pole can be handled without damaging its finish.

Данные для подтверждения в заказе

Размеры по каталогу: 9000*60*3.75MM+1500*60*3.75MM*2. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.

Информация для запроса

Attached equipment, positions and project structural requirements.
Flange and anchor layout, cable access and foundation scope.
Arm orientation, packing dimensions and available unloading equipment.

Связанные изделия

Светодиодные светофоры и дорожные контроллеры с обычным или солнечным питанием, переносные или мобильные устройства, обычные и солнечные предупреждающие огни, различные сигнальные табло и опоры.

9M Street Light Pole With 1.5M Double Arms