A tradução completa desta página está sendo preparada. Parte do conteúdo é exibida no idioma original.

9M Street Light Pole With 1.5M Double Arms

Modelo:	NJGQ-DGDB-9000-1500*2
Body_Material:	Steel Q235
Características:	Hot Dip Galvanized Antirust + Plastic Coated
Running_Time:	Opcional
Comunicação:	Opcional
Alimentação:	Opcional

FALE CONOSCO

Detalhes do produto

Informações básicas:

Dimensões do produto:	9000603.75MM+1500603.75MM*2
Solar_Panel：	Opcional
Consumo de potência:	Opcional
Corrente de acionamento:	Opcional
Certificados:	CE(EMC+LVD) China National Standard(GB14887-2011/2016)
Garantia:	10 Years

Detalhes do produto:

Double Arm Design: Multiple Functions For Adding Solar & Normal Powered Street Light

Round Shape Design: Beautiful Shape For Outside Use At Lower Cost

Hot Dip Galvanized: Antirust And Long Term Use


9M Street Light Pole With 1.5M Double Arms, 1 Vertical Main Pole+2 Horizontal Arm Poles
Length:9000/1500MM	Bottom Flange: 350*16MM with 4 holes
Width: 60/60MM	Top Flange: 350*16MM with 4 holes
Thickness: 3.75/3.75MM	Foundation Cage: Additional Charge

9M Street Light Pole With 1.5M Double Arms is one type of our typical double arm street light pole,

which can be added with solar and normal powered street light, making a whole complete street light system.

9M Street Light Pole With 1.5M Double Arms has its long arm, so you can easily add any solar and normal powered street light on it, while its vertical main pole can hold its controller and carbinet with battery inside.

9M Street Light Pole With 1.5M Double Arms has hot dip galvanized process for antirust and long term use outside, so no worry about its appearance and stability in tough weather.

Street light poles are normally long, which are very hard for air shipping. The best way is to ship by sea and by full container. So it’s better to order in large quantity, especially for one container to save your shipping cost.

Envie-nos sua mensagem

Pole, arm and foundation coordination

Pole height and arm reach describe the installation geometry, but the foundation and structural design also depend on the equipment attached to them. List the signal heads, signs, luminaires and any solar components with their positions. The completed loading arrangement should be checked for the project location before fabrication is confirmed.

Compare the mounting drawing with the flange, anchor-bolt pattern and cable route at the site. Clarify whether the foundation cage, fixings and equipment brackets are included. For transport, confirm the longest section, packing method and unloading arrangements so the delivered pole can be handled without damaging its finish.

Detalhes a confirmar no pedido

Dimensões do catálogo: 9000*60*3.75MM+1500*60*3.75MM*2. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.

Informações para sua consulta

Attached equipment, positions and project structural requirements.
Flange and anchor layout, cable access and foundation scope.
Arm orientation, packing dimensions and available unloading equipment.

Produtos relacionados

Semáforos LED e controladores semafóricos com alimentação convencional ou solar, portáteis ou móveis; luzes de advertência convencionais ou solares, diversos painéis de sinalização e postes.

9M Street Light Pole With 1.5M Double Arms