Product photographs Click to enlarge ↗
Signal housings / 100 mm
3-Section LED Traffic Lights Part Housing Body 4 Inch(100MM)
Three-section housing for a 100 mm traffic light. Check LED module fit, lens dimensions, sealing parts and mounting points for the required assembly.
- Signal indication
- No
- Housing material
- UV PC Plastic+3-Section
- Supply options
- No
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: 3-Section Led Traffic Lights Part Housing Body 4 Inch(100MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | No |
|---|---|
| LED quantity | No |
| Display / housing shape | Round |
| Lens design | No |
| Wavelength | No |
| Light source | No |
Electrical & control
| Supply options | No |
|---|---|
| Control / communication | No |
| Power factor | No |
| Power consumption | No |
Housing & installation
| Dimensions / lens reference | 168*135*610MM(520)/φ100MM Diameter |
|---|---|
| Housing material | UV PC Plastic+3-Section |
| Module construction | No |
Options & supply
| Model / product reference | 3-Section Led Traffic Lights Part Housing Body 4 Inch(100MM) |
|---|---|
| Two-digit display option | No |
| One-digit display option | No |
| Warranty reference | 5 Years |
A closer look
3-Section LED traffic Lights Part Housing Body is the outer part of our 4 Inch(100MM) LED traffic light. Its 4 Inch(100MM) LED module is the inner part. These 2 parts together form a complete 100MM LED traffic light.
100MM(4 Inch) diameter is a kind of mini size traffic lights, common for small road, parking lot and car washing station, as well as teaching tools.
| 100MM(4 Inch) diameter, 2 aspects/sections as 100MM*2/102 | |
| Length: 168MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 135MM | Top bracket and bottom bracket as one set |
| Height with bracket: 610MM | Integrated visior: 40MM length, non-detachable |
Small Mini Size Design: 168*135*610MM
Selection & installation
Housing assembly and component fit
Choose the housing around the optical modules and mounting arrangement that will be installed in it. Check the usable module opening, internal depth, cable routing and access for closing or servicing the body. A housing with the same nominal signal size may still use different fixing points, sealing parts or brackets.
Confirm whether the quotation covers the empty body or an assembly with lenses, visors, gaskets and mounting hardware. If the project replaces an existing housing, provide its module dimensions and bracket drawing. Review the complete assembly and installation requirements together rather than treating the material name as proof of the finished signal’s performance.
Details to confirm on the order
- Catalogue dimensions
- 168*135*610MM(520)/φ100MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
Information for your enquiry
- Module opening, fixing pattern and space for the wiring or driver.
- Required body sections, visor arrangement and bracket dimensions.
- Included lenses, seals, fasteners and other assembly components.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
