Product photographs Click to enlarge ↗
Round / full-ball signals / 500 mm
3-Aspect LED Traffic Light With RYG Ball Traffic Light
Three-aspect red, yellow and green ball traffic light in one integrated housing. Review the signal dimensions, supply and mounting requirements.
- Signal indication
- Red+Yellow+Green Balls
- Housing material
- UV PC(Polycarbonate) Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Product reference: 3-Aspect Led Traffic Light 20 Inch(500MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red+Yellow+Green Balls |
|---|---|
| LED quantity | 272PCS/R+272PCS/Y+272PCS/G |
| Display / housing shape | Round |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 610*130*1795MM+480MM φDiameter |
|---|---|
| Housing material | UV PC(Polycarbonate) Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 3-Aspect Led Traffic Light 20 Inch(500MM) |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
3-Aspect Largest Integrated Traffic Light Body: 610*130*1795MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 3 Aspect/Section Led Traffic Light With RYG Ball Traffic Light, as 20 Inch(500MM)*3/503 | |
| Length: 610MM | Steel bracket: 130MM*100MM |
| Width/Thickness: 130MM | Top bracket and bottom bracket as one set |
| Height: 1795MM | Detachable visior: 400MM length |
We are 20Inch(500MM) 3-Aspect Red Yellow Green Ball Traffic Light Factory Since 2006, while this largest diameter traffic light is one kind of Vehicle Traffic Light series, which include ball/arrow vehicle traffic light and its additional traffic light countdown timer.
This product has only 1 integrated traffic light body for strongest structure to hold our largest diameter traffic light as a whole set.
This product has 3 separate statuses, including red traffic light time for stop, yellow traffic light time for caution, and green traffic light time for go.
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
Compare the number and arrangement of aspects with the assembly drawing supplied for the order. Include the required viewing direction, installation height and existing support details when asking for a matching version. This makes the mechanical and control requirements visible before the final configuration is agreed.
Details to confirm on the order
- Catalogue dimensions
- 610*130*1795MM+480MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
