Product photographs Click to enlarge ↗
Pedestrian signals / 300 mm
3-Aspect LED Traffic Light With Red Green Pedestrian Traffic Signal Timer
Three-aspect pedestrian signal with red and green indications and a timer. Review the display arrangement and crossing controller requirements.
- Signal indication
- RG Pedestrians+RG Timer
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
For a crossing application, specify the pedestrian symbol, its orientation and the required red/green arrangement. The approved crossing design and controller timing plan determine the operating sequence.
Product reference: 3-Aspect Led Traffic Light 12 Inch(300MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | RG Pedestrians+RG Timer |
|---|---|
| LED quantity | 56+120PCS/P+112PCS*2/T |
| Display / housing shape | Round |
| Lens design | Clear flat lens |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Control / communication | Self-Learn/RS485 Real-Time |
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 400*145*1205/1125MM+φ254/268MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 3-Aspect Led Traffic Light 12 Inch(300MM) |
|---|---|
| Two-digit display option | Red Timer+Green Timer |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
3-Aspect Attachable PC(Polycarbonate) Traffic Light Body: 400*145*1205/1125MM+φ254/268MM Diameter
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 3 Aspects/Sections Led Traffic Light With Red Green Pedestrian Traffic Signal Timer, as 12 Inch(300MM)*3/303 | |
| Length: 400MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 145MM | Top bracket and bottom bracket as one set |
| Height: 1205/1125MM(No Bracket) | Detachable visior: 200MM length |
This product is one kind of our Pedestrian Traffic Light series, which often includes red&green pedestrian traffic light and its additional traffic light countdown timer, reminding any pedestrian when to go or stop for any crossing.
This product has 3 detachable traffic light bodies, and these 3 aspects are connected by its long bolts and nuts as a whole body, while each traffic light body can be easily added or removed by such bolts and nuts.
This product has 2 statuses, including red pedestrian light time for stop and green pedestrian light time for go.
This product has a countdown timer that shows the remaining red and green times, helping pedestrians understand when to stop and cross.
Selection & installation
Selection notes for this signal
Crossing-symbol arrangement
Check the pedestrian symbol, its orientation and the required red and green arrangement against the crossing design. For a replacement, compare the visible symbol with the existing signal as well as its physical size. The crossing controller and approved timing plan determine the operating sequence and clearance period.
Countdown and control interface
Confirm how the countdown receives the remaining-time information from the installed controller. Where the specification lists self-learning and communication options, choose the required mode explicitly. Check the displayed colors, digit arrangement and behavior during a timing change; a matching housing size does not guarantee a matching countdown interface.
Details to confirm on the order
- Catalogue dimensions
- 400*145*1205/1125MM+φ254/268MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Countdown operating mode, displayed colors and controller timing interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Crossing symbols and viewing direction
- Required sequence and countdown interface
- Required quantity, destination and project documentation
