Some source specifications are awaiting confirmation. Please confirm the selected configuration with us.
Product photographs Click to enlarge ↗
Countdown signals / 200 mm
200MM(8 Inch) LED Traffic Light 1-Aspect Red Yellow Green/Red Green Countdown Timer
200MM 1-Aspect Red Yellow Green Red Green LED traffic Lights Countdown Timer is one kind of 200MM traffic light
- Signal indication
- Red+Yellow+Green Timer
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A countdown configuration needs a compatible timing source and display arrangement. Confirm the control method, required digits, displayed colors and connection diagram for the selected version.
Product reference: 8 Inch Led Traffic Lights 1-Aspect Countdown Timer. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red+Yellow+Green Timer |
|---|---|
| LED quantity | 56PCS*2/RG+28PCS*1/Y |
| Display / housing shape | Round |
| Lens design | Clear flat lens |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Control / communication | Self-Learn/RS485 Real-Time |
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*375(270)MM/184+200MM φDiameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 8 Inch Led Traffic Lights 1-Aspect Countdown Timer |
|---|---|
| Two-digit display option | Red Timer+Green Timer |
| One-digit display option | Yellow Timer |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
Triple Color Design: 3 Colors Together For Min Cost
| Led Traffic Light Countdown Timer 200MM NJGQ-DJS-200-1YS/FS3 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width: 110MM | Clear flat lens |
| Heright/Thickness: 275(No Brackets)/375MM | Detachable Visior: 155MM Length |
200MM(8 Inch) 1-Aspect Red Yellow Green/Red Green LED traffic Lights Countdown Timer is one kind of 200MM traffic light, which also includes 200mm vehicle traffic light, 200MMM Pedestrian Traffic Light and 200MM Lane Control Light.
Selection & installation
Countdown display and controller matching
This countdown display is intended to show the remaining time associated with the traffic signal. Confirm which colors and digits the project requires and how the display will obtain timing information. If self-learning and communication modes are listed as alternatives, select the mode that matches the installed controller rather than relying on the enclosure size.
Review the display behavior during startup, a change of timing plan and an interrupted input. Provide the controller model and the intended signal sequence when requesting the connection diagram. Compare the complete enclosure and bracket arrangement with the available installation space, keeping the countdown face aligned with the signal it accompanies.
Details to confirm on the order
- Catalogue dimensions
- 270*110*375(270)MM/184+200MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Controller interface and the required timing-input mode.
- Displayed colors, digit arrangement and behavior during timing changes.
- Mounting space, connection diagram and the supplied bracket or fixing set.
Let’s confirm the right version.
Send the product reference with these details:
- Display digits and signal arrangement
- Timing source and communication interface
- Required quantity, destination and project documentation
