Product photographs Click to enlarge ↗
Traffic signal products / 200 mm
200MM(8 Inch) Car Wash Light
200MM(8 Inch) Car Wash Light is one part of our 200MM traffic light series
- Signal indication
- Red/Yellow/Green/Mixed
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Match the selected signal configuration to the project drawing and control system. Confirm the indication, electrical version and installation interface before ordering.
Product reference: 8 Inch Car Wash Light NJGQ-CD-200-1YS2. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red/Yellow/Green/Mixed |
|---|---|
| LED quantity | 36*2PCS/A+45PCS/B Or 122PCS/B |
| Display / housing shape | Round With Arrow/Ball/Mixed |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 235*235*105(200*200*25)MM/187.5MM φDiameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 8 Inch Car Wash Light NJGQ-CD-200-1YS2 |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
IP65 Protest: Gel Sealing For Supper Waterproof And Dustproof
| 200MM(8 Inch) Car Wash Light NJGQ-CD-200-1YS2 | |
| Length: 235/200MM | IP65: Backside Geal Sealing |
| Width: 235/200MM | Two Optional Lenses:Transparent&Flat/Cobweb&Curve |
| Heright/Thickness: 105/25MMDetachable | Detachable Visior: 105MM Length |
This product is one part of our 200MM traffic light series, which also includes 200MM housing body as its outer part, these 2 parts together make one whole piece of our 200MM traffic light.
200MM diameter is a kind of normal size LED traffic light, common for small road, parking lot and car washing station, as well as teaching tools.
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
The catalogue identifies this version as 200 mm. Use that size as a starting point for comparing optical modules, then check the full assembly dimensions, bracket position and cable entry. Selection for a road project also depends on the applicable signal specification and site layout, not diameter alone.
Details to confirm on the order
- Catalogue dimensions
- 235*235*105(200*200*25)MM/187.5MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Required indication and configuration
- Supply, control interface and installation details
- Required quantity, destination and project documentation
