Product photographs Click to enlarge ↗
Pedestrian signals / 200 mm
200MM(8 Inch) 2-Aspect Dynamic Red Green Pedestrian Signal Traffic Light
200MM(8 Inch) 2-Aspect Pedestrian Signal is part of our Pedestrian Signal, which includes Red Pedestrian Signal
- Signal indication
- Red Many+Dynamic Green Man
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
For a crossing application, specify the pedestrian symbol, its orientation and the required red/green arrangement. The approved crossing design and controller timing plan determine the operating sequence.
Product reference: 8 Inch 2-Aspect Dynamic Red Green Pedestrian Signal. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red Many+Dynamic Green Man |
|---|---|
| LED quantity | 50PCS/R+120PCS/G |
| Display / housing shape | Round With Red/Green Man |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*650(550)MM/184+200MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 8 Inch 2-Aspect Dynamic Red Green Pedestrian Signal |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
2-Aspect Separate Color Design: Each Aspect Has One Color For Easy Recognization
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Section Detachable Traffic Signal Light Body: 270*110*650(550)MM
| 200MM(8 Inch) 2-Aspect Pedestrian Signal Traffic Light, 2 aspect/section as 200MM*2/202 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 650MM | Detachable visior: 155MM length |
200MM(8 Inch) 2-Aspect Pedestrian Signal is one kind of our Pedestrian Signal, which includes Red Pedestrian Signal, Green Pedestrian Signal and addtional Traffic Light Countdown Timer, cautioning any pedestrian when to cross or stop at any crossing road.
This product has 2 aspects in total, and each aspect has only one color design, which means only one Pedestrian Signal Traffic Light will work in a signal time and two Pedestrian Signal Traffic Lights work in turn.
This product has 2 statuses, including red Pedestrian Signal Traffic Light time for stop, and green Pedestrian Signal Traffic Light for go.
This product can add a additional traffic light countdown timer into 3 aspects, it will more clearly remind any pedestrian to stop and cross at a road by its remaining red and green time.
Selection & installation
Selection notes for this signal
Crossing-symbol arrangement
Check the pedestrian symbol, its orientation and the required red and green arrangement against the crossing design. For a replacement, compare the visible symbol with the existing signal as well as its physical size. The crossing controller and approved timing plan determine the operating sequence and clearance period.
The catalogue identifies this version as 200 mm. Use that size as a starting point for comparing optical modules, then check the full assembly dimensions, bracket position and cable entry. Selection for a road project also depends on the applicable signal specification and site layout, not diameter alone.
Details to confirm on the order
- Catalogue dimensions
- 270*110*650(550)MM/184+200MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Required crossing symbols, their orientation and the support arrangement.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Crossing symbols and viewing direction
- Required sequence and countdown interface
- Required quantity, destination and project documentation
