Product photographs Click to enlarge ↗
Signal housings / 200 mm
200MM(8 Inch) 1-Section LED Traffic Light Body
200MM(8 Inch) 1-Section LED traffic Lights Body is the outer part of our 200MM traffic light
- Signal indication
- Optional
- Housing material
- 270*110*375(275)MM
- Supply options
- Optional
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: 8 Inch 1-Section Led Traffic Light Body. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Optional |
|---|---|
| LED quantity | Optional |
| Display / housing shape | Round |
| Lens design | Optional |
| Wavelength | Optional |
| Light source | Optional |
Electrical & control
| Supply options | Optional |
|---|---|
| Control / communication | Optional |
| Power factor | Optional |
| Power consumption | Optional |
Housing & installation
| Dimensions / lens reference | 270*110*375(275)/184+200MM Diameter |
|---|---|
| Housing material | 270*110*375(275)MM |
| Module construction | UV PC Plastic+1-Section |
Options & supply
| Model / product reference | 8 Inch 1-Section Led Traffic Light Body |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
200MM*1 1-Section Addable Traffic Light Body: 270*110*375(275)MM
| Led Traffic Lights Body 200MM, 1 aspect/section as 200MM*1/201 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 375MM | Visor length: 155MM. Confirm the attachment type for the requested version. |
200MM(8 Inch) 1-Section LED traffic Lights Body is the outer part of our 200MM LED traffic Lights, which also includes 200MM Traffic Light LED module as its inner part, these 2 parts together make one whole piece of our 200MM Traffic Light.
1-Section Addable LED traffic Lights Body is addable, it can be easily added to be 2 sections or more sections by placing long bolts and nuts through the middle parts of the same 2 or more sections.
It has 2 standard accessories as 1 set of metal steel brackets and 1 piece of PC plastic visors. Top bracket and bottom bracket is considered as one set for installing on a light pole. Each visor is fixed into the front of each raffic signal light body, providing a better viewing angle for any driver and pedestrian on road.
Selection & installation
Choose the housing around the optical modules and mounting arrangement that will be installed in it. Check the usable module opening, internal depth, cable routing and access for closing or servicing the body. A housing with the same nominal signal size may still use different fixing points, sealing parts or brackets.
Confirm whether the quotation covers the empty body or an assembly with lenses, visors, gaskets and mounting hardware. If the project replaces an existing housing, provide its module dimensions and bracket drawing. Review the complete assembly and installation requirements together rather than treating the material name as proof of the finished signal’s performance.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
