Product photographs Click to enlarge ↗
Signal housings / 200 mm
200MM(8 Inch) 4-Section Traffic Light Repair And Replacement Body
200MM(8 Inch) 4-Section Traffic Light Repair And Replacement Body is the outer part of our 200MM Traffic Signal Light
- Signal indication
- Optional
- Housing material
- UV PC Plastic+4-Section
- Supply options
- Optional
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: Traffic Light Repair And Replacement 200MM NJGQ-DK-200-4YS. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Optional |
|---|---|
| LED quantity | Optional |
| Display / housing shape | Round |
| Lens design | Optional |
| Wavelength | Optional |
| Light source | Optional |
Electrical & control
| Supply options | Optional |
|---|---|
| Control / communication | Optional |
| Power factor | Optional |
| Power consumption | Optional |
Housing & installation
| Dimensions / lens reference | 270*110*1200(1100)MM/184+200MM φDiameter |
|---|---|
| Housing material | UV PC Plastic+4-Section |
| Module construction | Optional |
Options & supply
| Model / product reference | Traffic Light Repair And Replacement 200MM NJGQ-DK-200-4YS |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
4-Section Detachable & Attachable PC(Polycarbonate) Traffic Signal Light Body: 270*110*1200(1100)MM
Upgradeable Installation Bracket: Internal-Wiring Aluminum Bracket Instead Of Steel Bracket
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 200MM(8 Inch) 4-Section Traffic Light Repair And Replacement Body, 4 Sections/Aspects As 200MM*4/204 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height: 1200MM/1100MM(No Bracket) | Detachable visior: 155MM length |
This product is the outer part of our 200MM Traffic Signal Light, which also includes 200MM Traffic Signal Light LED module as its inner part, these 2 parts together make one whole piece of our 200MM Traffic Signal Light.
This product has a detachable design. Its 4 single-section housings are joined with long bolts and nuts to form one 4-section body.
This product has 2 standard accessory types: 1 set of steel mounting brackets and 4 PC plastic visors. The top and bottom brackets form one set for mounting on a light pole. Each visor is attached to the front of its corresponding signal housing to improve viewing for drivers and pedestrians.
Selection & installation
Housing assembly and component fit
Choose the housing around the optical modules and mounting arrangement that will be installed in it. Check the usable module opening, internal depth, cable routing and access for closing or servicing the body. A housing with the same nominal signal size may still use different fixing points, sealing parts or brackets.
Confirm whether the quotation covers the empty body or an assembly with lenses, visors, gaskets and mounting hardware. If the project replaces an existing housing, provide its module dimensions and bracket drawing. Review the complete assembly and installation requirements together rather than treating the material name as proof of the finished signal’s performance.
Confirm the supplied version
Use the product photograph and requested function to obtain a matching drawing and connection diagram. Agree the supplied components and their installation interfaces before confirming the order. Where a replacement is required, include the existing product label and measurements so that the supplier can compare the actual parts.
Information for your enquiry
- Module opening, fixing pattern and space for the wiring or driver.
- Required body sections, visor arrangement and bracket dimensions.
- Included lenses, seals, fasteners and other assembly components.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
