Product photographs Click to enlarge ↗
Lane control signals
250MM(10 Inch) Aluminum Red Cross Green Arrow Lane Control Signal
250MM(10 Inch) Aluminum Red Cross Green Arrow Lane Control Signal is one kind of 200mm traffic light series
- Signal indication
- Red Cross+Green Arrow
- Housing material
- Die-Cast Aluminum Alloy
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Product reference: 10 Inch Aluminum Red Cross Green Arrow Lane Control Signal. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red Cross+Green Arrow |
|---|---|
| LED quantity | 17Sets/R+13Sets/G |
| Display / housing shape | Square With Cross+Arrow |
| Lens design | Transparent&Flat By Sealing Gel |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 26MM Pixel Tube+5MM LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 250*250*115(75)MM/250MM φDiameter |
|---|---|
| Housing material | Die-Cast Aluminum Alloy |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 10 Inch Aluminum Red Cross Green Arrow Lane Control Signal |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
IP65 Protest: Gel Sealing For Supper Waterproof And Dustproof
| 250MM(10 Inch) Lane Control Signal NJGQ-CD-250-1FL2 | |
| Length: 250MM | IP65: Front Geal Sealing |
| Width/Thickness: 115MM | Features: Inbuilt Hanging Hole+Customized Design |
| Heright: 250MM | Visior: No Visor |
This product is one kind of 200mm traffic light series, which also includes 200MM ball or arrow vehicle traffic light, 200MM pedestrian traffic light and 200MM countdown timer.
Selection & installation
Selection notes for this signal
Lane indication and symbol orientation
Provide the exact red-cross and green-arrow arrangement required for the lane. Check the arrow direction and its alignment with the lane at the intended mounting position. A lane-control indication needs a defined control sequence and fault response; the signal head should be matched to that system rather than ordered by color alone.
The catalogue identifies this version as 250 mm. Use that size as a starting point for comparing optical modules, then check the full assembly dimensions, bracket position and cable entry. Selection for a road project also depends on the applicable signal specification and site layout, not diameter alone.
Details to confirm on the order
- Catalogue dimensions
- 250*250*115(75)MM/250MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Cross and arrow orientation for the exact lane and mounting position.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Lane symbols and viewing direction
- Control interface and required indications
- Required quantity, destination and project documentation
