Product photographs Click to enlarge ↗
Round / full-ball signals / 100 mm
100MM(4 Inch) 1-Aspect Red Yellow Green Ball Shape LED Traffic Light
100 mm single-aspect red, yellow and green ball LED traffic light. Review the display arrangement and required power supply version.
- Signal indication
- Red/Yellow/Green Ball, Single Color
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Product reference: 4 Inch 1-Aspect Ball Shape LED Traffic Lights. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red/Yellow/Green Ball, Single Color |
|---|---|
| LED quantity | 26PCS/R+26PCS/Y+26PCS/G |
| Display / housing shape | Round With Ball Design |
| Lens design | Transparent & Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 168*140*265(175+90)MM/100MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 4 Inch 1-Aspect Ball Shape LED Traffic Lights |
|---|---|
| Two-digit display option | No |
| One-digit display option | No |
| Warranty reference | 5 Years |
A closer look
100MM(4 Inch) 1-Aspect Red/Yellow/Green Ball Shape Traffic Light is one part of 100MM LED traffic light series, which include vehicle traffic light and pedestrian traffic light, as well as countdown timer with 1/2/3 or more aspects.
100MM(4 Inch) diameter is a kind of mini size LED traffic light, common for small road, parking lot and car washing station, as well as teaching tools.
| 100MM(4 Inch) Led Traffic Light, 1 aspect/section as 100MM*1/101 | |
| Length: 168MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 140MM | Top bracket and bottom bracket as one set |
| Height with bracket: 265MM | Integrated visior: 40MM length, non-detachable |
Small Mini Size Design: 168*140*265MM
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
Single-aspect wiring
Where several colors share one aspect, confirm the connection for each color and how the controller selects it. Do not assume that a single housing uses one shared switched supply. Review the supplied wiring diagram and agree the startup and off states before integrating the signal with an existing controller.
Details to confirm on the order
- Catalogue dimensions
- 168*140*265(175+90)MM/100MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
