| Model Number: | T2.5-Digit LED Traffic Light Countdown Timer NJGQ-DJS-188-1FT3-1000-600-540 |
|---|---|
| Housing Body: | Die Casting Iron+PC Plastic |
| LED Module: | UV PC Plastic & Electronics |
| LED Color: | 2.5-Digit 3-Color RYG Timer |
| LED Number: | 16 LED Blocks |
| Shape: | Square With RYG Timer |
Product Details
Basic Information:
| Product Size: | 1000*600*140(20+100++=20)MM/Font Height 540MM |
|---|---|
| Lenses： | Transparent&Flat |
| Wavelength: | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Input Voltage: | 12-24VDC Or 110-220VAC |
| Light Source: | 5MM Diameter LED |
| Communicate: | Self-Learn/RS485 Real-Time |
| Power Factor: | ≥0.85 @ 25℃ |
| Power Consumption: | ＜3W Per Lamp |
Product Details:
Outer Silicone Gel Sealing: IP65 For Max Waterproof And Dustproof
1-Aspect Double-Door Traffic Light Body: 1000*600*140MM/Font Height 540MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
 |
 |
|---|---|
| 1000*600MM 2.5-Digit LED Traffic Light Countdown Timer, Single Face With Single Door | |
| Length: 1000MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 140MM | Top bracket and bottom bracket as one set |
| Height: 600MM | Detachable visior: 320MM length |
1000*600MM 2.5-Digit LED Traffic Light Countdown Timer is one kind of 100MM to 500MM diameter traffic signal light countdown timer, which displays the remaining seconds of red/yellow/green light as additional visual aid tool for traffic.
1000*600MM 2.5-Digit LED Traffic Light Countdown Timer has outer silicone gel sealing for its LED module，so it can meet IP65 grade for Max waterproof and dustproof
1000*600MM 2.5-Digit LED Traffic Light Countdown Timer has only 1 aspect, but it has 3-in-1 design, which means it has red timer, yellow timer and green timer in total.
1000*600MM 2.5-Digit LED Traffic Light Countdown Timer has 3 statuses, including red countdown timer for stop, yellow countdown timer for caution, and green countdown timer for go.
Send your message to us
Countdown display and controller matching
This countdown display is intended to show the remaining time associated with the traffic signal. Confirm which colors and digits the project requires and how the display will obtain timing information. If self-learning and communication modes are listed as alternatives, select the mode that matches the installed controller rather than relying on the enclosure size.
Review the display behavior during startup, a change of timing plan and an interrupted input. Provide the controller model and the intended signal sequence when requesting the connection diagram. Compare the complete enclosure and bracket arrangement with the available installation space, keeping the countdown face aligned with the signal it accompanies.
Details to confirm on the order
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Controller interface and the required timing-input mode.
- Displayed colors, digit arrangement and behavior during timing changes.
- Mounting space, connection diagram and the supplied bracket or fixing set.