Product photographs Click to enlarge ↗
Signal housings / 300 mm
12 Inch(300MM) 4-Section PC Plastic Traffic Light Housing Body
300 mm four-section PC plastic traffic light housing. Check LED module fit, mounting dimensions and the required lens and sealing parts.
- Signal indication
- Optional
- Housing material
- UV PC(Polycarbonate) plastic
- Supply options
- Optional
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: 12Inch 4-Section Traffic Light Housing Body. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Optional |
|---|---|
| LED quantity | Optional |
| Display / housing shape | Round |
| Lens design | Optional |
| Wavelength | Optional |
| Light source | Optional |
Electrical & control
| Supply options | Optional |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Module |
Housing & installation
| Dimensions / lens reference | 400*145*1580/1500MM+φ338/335MM Diameter |
|---|---|
| Housing material | UV PC(Polycarbonate) plastic |
| Module construction | Optional |
Options & supply
| Model / product reference | 12Inch 4-Section Traffic Light Housing Body |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
4-Aspect Attachable PC(Polycarbonate) Traffic Light Body: 400*145*1580/1500MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 12-Inch(300MM) Ball LED Traffic Light System With Timer, 4 aspects/sections as 300MM*4/304 | |
| Length: 400MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 145MM | Top bracket and bottom bracket as one set |
| Height: 1580/1500MM(No Bracket) | Detachable visior: 200MM length |
12Inch(300MM) 4-Section PC Plastic Traffic Light Housing Body is one type of our 100MM to 500MM diameter traffic light housing body, which is the outer part of whole traffic light, this part and its inner part of traffic light LED modules together make a whole set.
12Inch(300MM) 4-Section PC Plastic Traffic Light Housing Body has 4 sections in total, and each section can hold one LED module as required for making the whole traffic light as a whole set.
Selection & installation
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
