Product photographs Click to enlarge ↗
Traffic controllers
22-Output Wireless Solar Traffic Signal Controller
22-output wireless solar traffic signal controller. Review output allocation, control sequence and power requirements for the installation.
- Housing material
- Galvanized iron sheet with a powder-coated finish
- Power supply
- 12VDC Battery
- Outputs / phases
- 22-Output+4-Phase
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Start with the output schedule and the approved phase plan. Match connected lamp loads, supply voltage and any wired or wireless interfaces to the controller documentation. Output count alone does not define a safe operating sequence.
Product reference: 22-Output Wireless Solar Traffic Signal Controller. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Electrical & control
| Power supply | 12VDC Battery |
|---|---|
| Outputs / phases | 22-Output+4-Phase |
| Power consumption | ＜0.2W/system |
| Output current | ≤8A/output |
Housing & installation
| Dimensions / lens reference | 335 × 235 × 155 mm |
|---|---|
| Housing material | Galvanized iron sheet with a powder-coated finish |
Options & supply
| Model / product reference | 22-Output Wireless Solar Traffic Signal Controller |
|---|---|
| Feature | 433MHz Wireless + External Antenna |
| Network option | Optional |
| Warranty reference | 5 Years |
A closer look
1000M Wireless Communication: 433MHz Frequency
Powder-Coated Galvanized Iron Sheet Body: 335 × 235 × 155 mm For Small Size And Tough Use
22-Output And 4-Phase: 4 Phases For 4 Different Directions By 22 Outputs
| 22-Output Wireless Solar Traffic Signal Controller, NJGQ-XHJ-22-WX12 | |
| Length: 335MM | Button Design For Easy Operation |
| Width/Depth: 235MM | 1000M Wireless Communication |
| Height:155MM | 22-Output+4-Phase |
This product is one type of our traffic controller system, which includes wire traffic controller and wireless traffic controller, as well as all connected traffic lights by wire or wireless.
This product has a galvanized iron sheet body with a powder-coated finish and a 335 × 235 × 155 mm mini size, so it is long life use and easy portable.
This product is solar powered by wireless communication, its wireless range can be 1000M at 433MHz frequency.
This product has 22 outputs at max, which means it can separately connect with 22 traffic light lamps by 1000M wireless communication.
Selection & installation
Controller channels and phase planning
Start with a channel schedule showing every lamp output and the movement it controls. An output count describes connection channels; it does not by itself define the number of junction approaches or a safe phase plan. Keep pedestrian calls, arrow movements and countdown interfaces explicit in the proposed wiring schedule.
Before selecting the controller, compare the lamp supply, load per channel and required switching arrangement with its terminal diagram. Provide the intended sequence, clearance intervals and any external inputs for review. Confirm the startup condition and fault response with the supplier and the project engineer before the unit is installed.
Wireless commissioning
Identify the coordinating unit and each remote unit on the site drawing. Confirm the pairing procedure, update behavior and defined response to a lost connection. Verify the link with the equipment in its actual operating positions; quoted radio reach should not replace an on-site communication check.
Details to confirm on the order
- Catalogue dimensions
- 335 × 235 × 155 mm. Check the space needed for connections, installation and servicing as well as the outside dimensions. Confirm the supplied component and its connection drawing before integration.
- Published current reference
- ≤8A/output. Confirm the applicable load conditions and complete wiring diagram for the selected version before assigning connected equipment to its terminals.
Information for your enquiry
- Lamp quantity and electrical load connected to each output.
- Required stages, external inputs and any countdown communication.
- Terminal layout, cabinet space and the approved commissioning sequence.
Let’s confirm the right version.
Send the product reference with these details:
- Output schedule, lamp loads and phase plan
- External inputs, terminal layout and fault response
- Required quantity, destination and project documentation
