Product photographs Click to enlarge ↗
Warning & flashing lights
5MM-LED Solar Flash Road Hazard Warning Lamps Sequential Light System
Sequential solar road hazard warning lamps using 5 mm LEDs. Confirm the required flashing sequence, power arrangement and site layout.
- Signal indication
- Yellow
- Housing material
- UV PC Plastic
- Power supply
- 3.7V 1000mAh 18650 Lithium Battery
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Define the required warning pattern and the operating arrangement for the site. Where several units work together, confirm their sequence, synchronization and installation positions.
Product reference: Warning Light NJGQ-SSG-100-1YSPMD1. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Yellow |
|---|---|
| LED quantity | 8PCS, 5MM Diameter |
| Light source | 5MM Diameter LED |
Electrical & control
| Power supply | 3.7V 1000mAh 18650 Lithium Battery |
|---|---|
| Solar panel | 0.75Wp Solar Panel(5V+160mA) |
| Operating-time reference | 7 Rainy Days(168 Hours) After Full Charge |
| Control / communication | Wireless Radio |
| Operating mode | Sequential as One By One |
| Power consumption | 0.02W |
| Power consumption per lamp | ＜0.1W Per Lamp |
Housing & installation
| Dimensions / lens reference | 210*100*160MM |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | Warning Light NJGQ-SSG-100-1YSPMD1 |
|---|---|
| Warranty reference | 5 Years |
A closer look
Small Design Body: 200*97*167MM Size For Easy Take And Installation
Double-Side LED Design: Increase Warning Light Effect
Endless Green Solar Power：Charge Your Lithium Battery With Solar Panel
| 5MM-LED Solar Flash Road Hazard Warning Lamps Sequential Light System | |
| Length: 200MM | Steel bracket: No |
| Width/Thickness: 97MM | Solar Power By Solar Panel |
| Height:167MM | Long Term Use By Lithium Battery |
This product is one part of our traffic warning light series, which include normal/solar powered warning light, and its possible battery and solar panel, as well as traffic warning light controller board.
This product is a kind of mini size traffic warning light, common for any road under constructing and repairing, as well as temporary traffic control.
The 5MM-LED solar sequential road warning light has LEDs on both faces that flash yellow simultaneously, with outward-projecting lenses.
This product also has its unique side installation port, making it easy for line installation alone one side of your road.
This product can work together by wireless communication, so 2 or more warning lights can work at the time or in turn for synchronous and sequential warning light effect.
In addition, if one of them doesn’t work, others will continue to work. Any of them can work alone as one solar flasher or solar blinker.
Selection & installation
Sequence layout and site configuration
A sequential warning system needs an agreed lamp order as well as individual lamp specifications. Mark the start point, direction of progression and the position of each unit on the site layout. Check that the planned sequence remains understandable from the approaching driver’s view and matches the authorized traffic-management arrangement.
Ask how lamps are assigned to a sequence and how a replacement unit joins it. Review synchronization, daylight operation and the response to a missing or discharged lamp. If the installation uses solar power, assess the energy arrangement with the actual operating schedule and seasonal conditions rather than panel size alone.
Confirm the supplied version
Use the product photograph and requested function to obtain a matching drawing and connection diagram. Agree the supplied components and their installation interfaces before confirming the order. Where a replacement is required, include the existing product label and measurements so that the supplier can compare the actual parts.
Information for your enquiry
- Lamp quantity, order, spacing and the intended viewing direction.
- Pairing or synchronization method and replacement-unit procedure.
- Mounting details, charging access and required operating hours.
Let’s confirm the right version.
Send the product reference with these details:
- Flash pattern, sequence and unit quantity
- Power source, operating schedule and mounting
- Required quantity, destination and project documentation
