Product photographs Click to enlarge ↗
Warning & flashing lights / 300 mm
300MM Sequential Traffic Flashing Warning Light System
300 mm sequential flashing traffic warning light system. Review the flashing arrangement, lens options and installation requirements.
- Signal indication
- Yellow/Single Color
- Housing material
- UV PC Plastic & Electronics
- Power supply
- 12V 5Ah lithium battery
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Define the required warning pattern and the operating arrangement for the site. Where several units work together, confirm their sequence, synchronization and installation positions.
Product reference: NJGQ-SSG-300-1YSPMD1. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Yellow/Single Color |
|---|---|
| LED quantity | 147/168PCS/Ball |
| Light source | 5MM Diameter LED |
Electrical & control
| Power supply | 12V 5Ah lithium battery |
|---|---|
| Solar panel | 8Wp polycrystal |
| Operating-time reference | 7 Rainy Days(168 Hours) After Full Charge |
| Control / communication | Wireless Radio |
| Operating mode | Sequential Or Synchronous |
| Power consumption | ＜0.3W Per Lamp |
| Power factor | ≥0.85 @ 25℃ |
Housing & installation
| Dimensions / lens reference | 310*310*100MM/φ300+254/268MM Diameter |
|---|---|
| Housing material | UV PC Plastic & Electronics |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | NJGQ-SSG-300-1YSPMD1 |
|---|---|
| Warranty reference | 5 Years |
A closer look
Standard Design Body: 310*310*100MM Size For Easy Take And Installation
2 Optional Lenses: Transparent/Yellow Coweb Lenses For More Choices
Endless Green Solar Power：Charge Your Lithium Battery With Solar Panel
| 300MM Sequential Traffic Flashing Warning Light System With 2 Optional Lenses | |
| Length: 310MM | Steel bracket: No |
| Width/Thickness: 310MM | Solar Power By Solar Panel |
| Height: 100/110MM | Long Term Use By Lithium Battery |
This product With 2 Optional Lenses is one part of our traffic warning light series, which include normal/solar powered warning light, and its possible battery and solar panel, as well as traffic warning light controller board.
This product With 2 Optional Lenses is a kind of normal size traffic warning light, common for any road under constructing and repairing, as well as temporary traffic control.
This product With 2 Optional Lenses has transparent flat lenses, it only has another option for yellow cobweb lenses for more lighting effect.
This product With 2 Optional Lenses has low power comsumption design at 0.3W, so it can last 7 rainy days(168 hours) after full charge with its standard 12V 5Ah lithium battery.
This product With 2 Optional Lenses can work together by wireless communication, so 2 or more warning lights can work at the time or in turn for synchronous and sequential warning light effect.
In addition, if one of them doesn’t work, others will continue to work. Any of them can work alone as one solar flasher or solar blinker.
Selection & installation
Sequence layout and site configuration
A sequential warning system needs an agreed lamp order as well as individual lamp specifications. Mark the start point, direction of progression and the position of each unit on the site layout. Check that the planned sequence remains understandable from the approaching driver’s view and matches the authorized traffic-management arrangement.
Ask how lamps are assigned to a sequence and how a replacement unit joins it. Review synchronization, daylight operation and the response to a missing or discharged lamp. If the installation uses solar power, assess the energy arrangement with the actual operating schedule and seasonal conditions rather than panel size alone.
Details to confirm on the order
- Catalogue dimensions
- 310*310*100MM/φ300+254/268MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
Information for your enquiry
- Lamp quantity, order, spacing and the intended viewing direction.
- Pairing or synchronization method and replacement-unit procedure.
- Mounting details, charging access and required operating hours.
Let’s confirm the right version.
Send the product reference with these details:
- Flash pattern, sequence and unit quantity
- Power source, operating schedule and mounting
- Required quantity, destination and project documentation
