Some source specifications are awaiting confirmation. Please confirm the selected configuration with us.
Product photographs Click to enlarge ↗
Mobile & solar signals / 300 mm
300MM Mobile Traffic Light As Automated Flagger Assistance Device And Guardian Smart Flagger
Portable 300 mm traffic signal for temporary traffic control and automated flagger applications. Confirm the required control and installation arrangement.
- Signal indication
- Red And Flashing Yellow Circular Signals
- Housing material
- Die Cast Iron+PC Plastic
- Power supply
- 24V 50Ah Battery(Parallel Connection)
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Define the installation position, signal sequence and daily operating schedule. Confirm the supplied power arrangement, mobility requirements and any coordination between units for the actual site conditions.
Product reference: Automated Flagger NJGQ-JD-300-2YS2-YDDZ24. Use the photographs and the specification groups below to compare this configuration with your project requirements.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red And Flashing Yellow Circular Signals |
|---|---|
| LED quantity | 120PCS/R+120PCS/Y |
| Light source | 5MM Diameter LED |
Electrical & control
| Power supply | 24V 50Ah Battery(Parallel Connection) |
|---|---|
| Solar panel | 100Wp Solar Panel |
| Operating-time reference | 5 Rainy Days(120 Hours) Without Charging |
| Control / communication | Wireless 433MHz Within 1000M |
| Operating mode | Red Light+Arm Down→Yellow Flash+Arm Up |
| Power consumption | ＜3W Per Lamp |
| Power factor | ≥0.85 @ 25℃ |
Housing & installation
| Dimensions / lens reference | 1560*1660MM Body/φ254MM Diameter PCB |
|---|---|
| Housing material | Die Cast Iron+PC Plastic |
| Module construction | UV PC Plastic & Electronics, 300MM Traffic Light |
Options & supply
| Model / product reference | Automated Flagger NJGQ-JD-300-2YS2-YDDZ24 |
|---|---|
| Warranty reference | 5 Years |
A closer look
300mm Mobile Traffic Light and Automated Flagger Support Unit: Product Guide for Project Buyers
This mobile 300mm traffic-light solution is intended for temporary traffic control where the work area, traffic direction or operating period may change. It helps a site team create an organised stop-and-go operation for planned road works, access restrictions and event management.
What to Define Before Configuration
- Define whether the unit will operate as a portable signal, an automated flagger support device or part of a paired temporary-control system.
- Review the work-zone layout, approach speed and required advance-warning arrangement before deployment.
- Confirm the intended power method, operating duration, transport arrangement and storage conditions.
- Plan the controller or coordination method if more than one unit must operate as a traffic-control pair.
Typical Project Applications
This solution is commonly considered for:
- Road maintenance, utility works and construction access
- Temporary lane closures and event traffic management
- Industrial sites with changing vehicle and pedestrian routes
Configuration and Integration Review
To avoid mismatched equipment at installation, confirm the following items with the project drawing and electrical schedule:
- Work-zone drawing, operating duration and daily traffic pattern
- Number of units and whether paired operation is required
- Power, charging or solar-support requirement
- Transport, deployment, storage and operator-training needs
The final electrical, optical, mechanical and environmental requirements should be confirmed against the approved project specification before production. This helps ensure that the supplied equipment, mounting parts and control interfaces align with the intended application.
Installation, Commissioning and Maintenance
Installation should be completed by qualified personnel following the site safety plan and local regulations. Before commissioning, check mounting security, cable protection, power isolation, controller logic and visibility from the intended approach. Record the final configuration and keep the wiring and inspection information available for future maintenance.
Questions Buyers Commonly Ask
Is a mobile signal suitable for every roadwork site?
The site operator should assess the work-zone risk, local authority rules and required traffic-management plan before deployment.
Can two mobile units be coordinated?
Paired operation can be planned when the required control logic and communication method are specified.
What makes a temporary deployment successful?
Clear advance warning, correct positioning, safe power arrangements and a documented operating procedure are essential.
Request a Project-Based Recommendation
For an accurate quotation, send the application description, site drawing, required quantity, preferred delivery location and any controller or mounting requirements. Our team can review the configuration before you place the order.
Original Product Information
Auto Flagger And Smart Flagger: Up And Down By Small Remoter
Trailer With 4 Wheels：Easy Movable And Mobile
2 Traffic Light Heads: One Red Light For Stop and Another Flashing Yellow Light For Go
Inbuilt Slolar Traffic Light Controller: Stand-Alone Or Work With Another By Wireless
|
300MM Mobile Traffic Light As Automated Flagger Assistance Device And Guardian Smart Flagger |
|
| Length:1560MM | Inbuilt Solar Panel And Battery As Power Source |
| Width: 1660MM | Inbuilt Solar Traffic Light Controller As Control Center |
| Gate arm length: 3000MM | 2 Sets Work As A Pair Or Each Works Alone |
This product is an extension to our traffic light trailer series, it has its mobile traffic light trailer and auto barrier gate for temporary traffic control at certain area.
This product has 300MM*2 traffic light, including red traffic light for stop and yellow flashing traffic light for go.
This product also its auto barrier gate, so its 3000MM long arm can work together with traffic light. When the gate arm is down, its traffic light is red.
300MM Traffic Light Trailer & 3000MM Barrier Gate As Automated Flagger additionally has a 4-wheel trailer as its base part, such 4 wheels makes it movable and moblie, so you can easily take and set up at anywhere for temporary traffic control by your own car.
As a whole set of automated flagger system, it can work alone by its inbuilt solar traffic light controller, or work with another one within 1000M by wireless communication as a pair, working in turn or synchronization.
Selection & installation
Define the installation position, signal sequence and daily operating schedule. Confirm the supplied power arrangement, mobility requirements and any coordination between units for the actual site conditions.
Let’s confirm the right version.
Send the product reference with these details:
- Operating schedule and signal sequence
- Supplied power equipment and site arrangement
- Required quantity, destination and project documentation
