Product photographs Click to enlarge ↗
Lane control signals / 200 mm
2-Aspect LED Traffic Light With Red Cross Green Arrow Lane Control Signal
2-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Signal is part of our Lane Control Signal from 100MM to 500MM traffic signal light
- Signal indication
- Red cross + green arrow
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Product reference: 2-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red cross + green arrow |
|---|---|
| LED quantity | 57PCS/R+55PCS/G |
| Display / housing shape | Round With Red Cross And Green Arrow |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*650(550)MM/184+200MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 2-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | OptionalOptional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
2-Aspect Separate Traffic Light Body: Each Aspect Has One Color For Easy Recognization
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Section Detachable Traffic Signal Light Body: 270*110*650(550)MM
| 2 Aspect/Section Led Traffic Light With Red Cross Green Arrow Lane Control Signal, as 8 Inch(200MM)*2/202 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 650MM | Detachable visior: 155MM length |
2 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal is one kind of our Lane Control Signal from 100MM to 500MM traffic signal light, allowing or forbidding one or more of the available lanes by the use green or red lights.
2 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal has 2 aspects in total, and each aspect has only one color design, which means only one Lane Control Signal will work in a signal time and two Lane Control Signals work in turn.
2 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal has 2 statuses, including Red Cross Lane Control Signal time for stop, and Green Arrow Lane Control Signal time for go.
2 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal can be reduced into only 1-aspect by place its red cross and green arrow in one aspect.
Selection & installation
Selection notes for this signal
Lane indication and symbol orientation
Provide the exact red-cross and green-arrow arrangement required for the lane. Check the arrow direction and its alignment with the lane at the intended mounting position. A lane-control indication needs a defined control sequence and fault response; the signal head should be matched to that system rather than ordered by color alone.
Compare the number and arrangement of aspects with the assembly drawing supplied for the order. Include the required viewing direction, installation height and existing support details when asking for a matching version. This makes the mechanical and control requirements visible before the final configuration is agreed.
Details to confirm on the order
- Catalogue dimensions
- 270*110*650(550)MM/184+200MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Cross and arrow orientation for the exact lane and mounting position.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Lane symbols and viewing direction
- Control interface and required indications
- Required quantity, destination and project documentation
