Product photographs Click to enlarge ↗
Countdown signals / 300 mm
2-Aspect LED Traffic Light With 3-In-1 Ball Traffic Signal Light Countdown Timer
2-Aspect LED traffic Light With 3-In-1 Ball Traffic Signal Light Countdown Timer is part of our 100MM to 500MM vehicle traffic light system
- Signal indication
- RYG Ball+RYG Timer
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A countdown configuration needs a compatible timing source and display arrangement. Confirm the control method, required digits, displayed colors and connection diagram for the selected version.
Product reference: 2-Aspect Led Traffic Light 12 Inch(300MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | RYG Ball+RYG Timer |
|---|---|
| LED quantity | 120*3PCS/Ped+112*2+56PCS/T |
| Display / housing shape | Round |
| Lens design | Clear flat lens |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Control / communication | Self-Learn/RS485 Real-Time |
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 400*145*830(750)MM+φ254/268MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 2-Aspect Led Traffic Light 12 Inch(300MM) |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Aspect Attachable Traffic Light Body: 400*145*830(750)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 2 Aspect/Section Led Traffic Light With 3-In-1 Ball Traffic Signal Light Countdown Timer, as 12 Inch(300MM)*2/302 | |
| Length: 400MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 145MM | Top bracket and bottom bracket as one set |
| Height: 830/750MM(No Bracket) | Detachable visior: 200MM length |
This product is one kind of our 100MM to 500MM vehicle traffic light system, which often has vehicle traffic light and countdown timer as a whole set, reminding any driver when to go or stop for any crossing.
This product has 2 aspects in total, and each aspect has 3-In-1 color design, which means three colors will work in turn according to traffic light rules.
This product has 3 statuses, including red vehicle traffic light time for stop, yellow vehicle traffic light time for caution and green vehicle traffic light for go.
This product has its own traffic light countdown timer, it will more clearly remind any driver to stop and go at a road by its remaining red, yellow and green time.
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
Countdown and control interface
Confirm how the countdown receives the remaining-time information from the installed controller. Where the specification lists self-learning and communication options, choose the required mode explicitly. Check the displayed colors, digit arrangement and behavior during a timing change; a matching housing size does not guarantee a matching countdown interface.
Details to confirm on the order
- Catalogue dimensions
- 400*145*830(750)MM+φ254/268MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Countdown operating mode, displayed colors and controller timing interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Display digits and signal arrangement
- Timing source and communication interface
- Required quantity, destination and project documentation
