Product photographs Click to enlarge ↗
Round / full-ball signals / 100 mm
2-Aspect LED Traffic Lights Red Green Ball Shape Parking
2-Aspect LED traffic Lights Red Green Ball Shape Parking is one part of 4 Inch(100MM) LED traffic lights series
- Signal indication
- Red+Green Balls
- Housing material
- UV PC Plastic
- Supply options
- 110~220VAC Or 12~24VDC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Product reference: 2-Aspect Parking Traffic Light 4 Inch(100MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red+Green Balls |
|---|---|
| LED quantity | 26PCS/R+26PCS/G |
| Display / housing shape | Round With Ball Design |
| Lens design | Transparent & Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 110~220VAC Or 12~24VDC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 168*140*445(350+90)MM/100MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronic |
Options & supply
| Model / product reference | 2-Aspect Parking Traffic Light 4 Inch(100MM) |
|---|---|
| Two-digit display option | No |
| One-digit display option | No |
| Warranty reference | 5 Years |
A closer look
This product is one part of 4 Inch(100MM) LED traffic lights series, which include vehicle traffic light and pedestrian traffic light, as well as countdown timer with 1 2 3 or more aspects
4 Inch(100MM) diameter is a kind of mini size LED traffic lights, common for small road, parking lot and car washing station, as well as teaching tools.
| 2 aspect/section Led Traffic Lights Red Green Ball Shape Parking, as 4 Inch(100MM)*2/102 | |
| Length: 168MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 140MM | Top bracket and bottom bracket as one set |
| Height with bracket: 445M | Integrated visior: 40MM length, non-detachable |
Small Mini Size Design: 168*140*440MM
Selection & installation
Selection notes for this signal
Access-control sequence
For a parking or access installation, state how the signal is triggered by the barrier, detector or operator. Confirm the intended red and green display states before connecting it to the access controller. Review the indication from both the driver’s stopping position and the approach so that the chosen mounting location supports the operating plan.
Compare the number and arrangement of aspects with the assembly drawing supplied for the order. Include the required viewing direction, installation height and existing support details when asking for a matching version. This makes the mechanical and control requirements visible before the final configuration is agreed.
Details to confirm on the order
- Catalogue dimensions
- 168*140*445(350+90)MM/100MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 110~220VAC Or 12~24VDC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
