Product photographs Click to enlarge ↗
Pedestrian signals / 200 mm
2-Aspect LED Traffic Light Countdown Timer With Red Green Pedestrian
2-Aspect LED traffic Light Countdown Timer With Red Green Pedestrian is part of our 100MM to 500MM Pedestrian Traffic Light
- Signal indication
- RG Pedestrian And RG Timer
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
For a crossing application, specify the pedestrian symbol, its orientation and the required red/green arrangement. The approved crossing design and controller timing plan determine the operating sequence.
Product reference: 2-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | RG Pedestrian And RG Timer |
|---|---|
| LED quantity | 50+70PCS/P+56*2+28*1PCS/T |
| Display / housing shape | Round With RG Pedestrian And Timer |
| Lens design | Clear flat lens |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Control / communication | Self-Learn/RS485 Real-Time |
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*650(550)MM/184+200MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 2-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | Red Timer+Green Timer |
| One-digit display option | Yellow Timer |
| Warranty reference | 5 Years |
A closer look
2-In-1 Design: Each Aspect Have 2 Colors Together For Min Cost
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Section Detachable Traffic Signal Light Body: 270*110*650(550)MM
| 2 Aspect/Section Led Traffic Light Countdown Timer With Red Green Pedestrian, as 8 Inch(200MM)*2/202 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 650MM | Detachable visior: 155MM length |
2 Aspect/Section LED traffic Light Countdown Timer With Red Green Pedestrian is one kind of our 100MM to 500MM Pedestrian Traffic Light, which often has pedestrian traffic light and pedestrian countdown timer as a whole set, reminding any pedestrian when to go or stop for any crossing.
2 Aspect/Section LED traffic Light Countdown Timer With Red Green Pedestrian only has 2 aspect traffic light bodys,each traffic light body has 2-in-1 design, which means both aspects have 2 colors together as red and green.
2 Aspect/Section LED traffic Light Countdown Timer With Red Green Pedestrian has 2 statuses, including red Pedestrian Traffic Light time for stop, and green Pedestrian Traffic Light time for go.
Selection & installation
Selection notes for this signal
Crossing-symbol arrangement
Check the pedestrian symbol, its orientation and the required red and green arrangement against the crossing design. For a replacement, compare the visible symbol with the existing signal as well as its physical size. The crossing controller and approved timing plan determine the operating sequence and clearance period.
Countdown and control interface
Confirm how the countdown receives the remaining-time information from the installed controller. Where the specification lists self-learning and communication options, choose the required mode explicitly. Check the displayed colors, digit arrangement and behavior during a timing change; a matching housing size does not guarantee a matching countdown interface.
Details to confirm on the order
- Catalogue dimensions
- 270*110*650(550)MM/184+200MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Countdown operating mode, displayed colors and controller timing interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Crossing symbols and viewing direction
- Required sequence and countdown interface
- Required quantity, destination and project documentation
