Product photographs Click to enlarge ↗
Signal housings / 200 mm
2-Aspect LED Traffic Light Body
2-Aspect LED traffic Light Body is the outer part of our 200MM Traffic Signal Light
- Signal indication
- Optional
- Housing material
- UV PC Plastic+2-Section
- Supply options
- Optional
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: 2-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Optional |
|---|---|
| LED quantity | Optional |
| Display / housing shape | Round |
| Lens design | Optional |
| Wavelength | Optional |
| Light source | Optional |
Electrical & control
| Supply options | Optional |
|---|---|
| Control / communication | Optional |
| Power factor | Optional |
| Power consumption | Optional |
Housing & installation
| Dimensions / lens reference | 270*110*550(650)MM/184+200MM φDiameter |
|---|---|
| Housing material | UV PC Plastic+2-Section |
| Module construction | Optional |
Options & supply
| Model / product reference | 2-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
2-Section Detachable & Attachable PC(Polycarbonate) Traffic Signal Light Body: 270*110*550(650)MM
Upgradeable Installation Bracket: Internal-Wiring Aluminum Bracket Instead Of Steel Bracket
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 2 Aspect/Section Led Traffic Light Body, as 8Inch(200MM)*2/202 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height: 650MM/550M(No Bracket) | Detachable visor: 155MM length |
This product is the outer part of our 200MM Traffic Signal Light, which also includes 200MM Traffic Signal Light LED module as its inner part, these 2 parts together make one whole piece of our 200MM Traffic Signal Light.
This product has detachable feasure, one section traffic signal light body plus another one section will make 2-section traffic signal light body easily by its long bolts and nuts connected through the middle parts of 2 sections.
This product has 2 standard accessories as 1 set of metal steel brackets and 2 pieces of PC plastic visors. Top bracket and bottom bracket is considered as one set for installing on a light pole. Each visor is fixed into the front of each raffic signal light body, providing a better viewing angle for any driver and pedestrian on road.
Selection & installation
Housing assembly and component fit
Choose the housing around the optical modules and mounting arrangement that will be installed in it. Check the usable module opening, internal depth, cable routing and access for closing or servicing the body. A housing with the same nominal signal size may still use different fixing points, sealing parts or brackets.
Confirm whether the quotation covers the empty body or an assembly with lenses, visors, gaskets and mounting hardware. If the project replaces an existing housing, provide its module dimensions and bracket drawing. Review the complete assembly and installation requirements together rather than treating the material name as proof of the finished signal’s performance.
Details to confirm on the order
- Catalogue dimensions
- 270*110*550(650)MM/184+200MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
Information for your enquiry
- Module opening, fixing pattern and space for the wiring or driver.
- Required body sections, visor arrangement and bracket dimensions.
- Included lenses, seals, fasteners and other assembly components.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
