Product photographs Click to enlarge ↗
Arrow & U-turn signals / 200 mm
1-Aspect LED Traffic Light With Red Green/Red Yellow Green Arrow
1-Aspect LED traffic Light With Red Green Red Yellow Green Arrow is one kind of 200mm vehicle traffic light
- Signal indication
- Red+Yellow+Green/Red+Green
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Match the arrow or U-turn indication to the movement shown on the junction drawing. Confirm symbol direction, aspect order and mounting orientation before selecting the electrical version.
Product reference: 1-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red+Yellow+Green/Red+Green |
|---|---|
| LED quantity | 34PCS/R+34PCS/Y+34PCS/G |
| Display / housing shape | Round With Arrow |
| Lens design | Transparent&Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*375(270)MM/184+200MM φDiameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
3-In-1 RYG Triple Color Design: Three colors Together For Min Cost
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
Triple Color Design: 3 Colors Together For Min Cost
| 1-Aspect Led Traffic Light With Red Green/Red Yellow Green Arrow NJGQ-FX-200-1YS3 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width: 110MM | Two Optional Lenses:Transparent&Flat/Cobweb&Curve |
| Heright/Thickness: 275(No Brackets)/375MM | Detachable Visior: 155MM Length |
This product is one kind of our 200MM vehicle LED traffic Light series, which also includes 200MM Ball LED traffic Light, both are used to remind any driver and pedestrian to go or stop on road.
This product has only 1 aspect, but this aspect has 3-in-1 design, which means one arrow traffic light has red arrow,yellow arrow and green arrow in total.
This product has 3 statuses, including red LED traffic Light time for stop, yellow LED traffic Lights for caution, and green LED traffic Lights for go.
This product has multiple functions, such as parking light on any parking lot, washing light on car washing station, access light on any entrance and exist, pedestrian traffic llight on sidewalk road, as well as racing light on racking track.
Selection & installation
Selection notes for this signal
Directional indication
Specify the direction of every arrow as viewed by the approaching road user, and confirm the color assigned to each indication. Similar-looking signal housings can carry different arrow layouts. For a replacement, send a front-view photograph and the movement drawing so the selected optics agree with the intended turning movement.
Single-aspect wiring
Where several colors share one aspect, confirm the connection for each color and how the controller selects it. Do not assume that a single housing uses one shared switched supply. Review the supplied wiring diagram and agree the startup and off states before integrating the signal with an existing controller.
Details to confirm on the order
- Catalogue dimensions
- 270*110*375(270)MM/184+200MM φDiameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Arrow direction for each movement, color order and the bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Arrow direction and aspect order
- Movement assignment and mounting arrangement
- Required quantity, destination and project documentation
