Product photographs Click to enlarge ↗
Round / full-ball signals / 300 mm
1-Aspect LED Traffic Light With Tri-Colore Ball Light
1-Aspect LED traffic Light With Tri-Colore Ball Light is one kind of 100MM to 500MM diameter vehicle traffic light
- Signal indication
- 3-In-1 Tri-Color RYG Ball
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Product reference: 1-Aspect Led Traffic Light 12 Inch(300MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | 3-In-1 Tri-Color RYG Ball |
|---|---|
| LED quantity | 120PCS/R+120PCS/Y+120PCS/G |
| Display / housing shape | Round With Ball |
| Lens design | Transparent&Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 400*145*455(375)MM/φ254/268MM |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 12 Inch(300MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
1-Aspect Attachable Traffic Light Body: 400*145*455(375)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 1 Aspect/Section Led Traffic Light With Tri-Colore Ball Light, as 12 Inch(300MM)*1/301 | |
| Length: 400MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 145MM | Top bracket and bottom bracket as one set |
| Height: 455MM/375MM(No Bracket) | Detachable visior: 200MM length |
This product is one kind of 100MM to 500MM diameter vehicle traffic light , which often includes ball traffic singal light, arrow singal light and additional countdown timer, reminding any driver to go through or stop at any crossing.
This product has only 1 aspect, but it has a 3-in-1 design, which displays red, yellow and green full-ball indications in the same aspect.
This product has 3 statuses, including red LED traffic Signal Light time for stop, yellow LED traffic Signal Light for caution, and green LED traffic Signal Light for go.
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
Single-aspect wiring
Where several colors share one aspect, confirm the connection for each color and how the controller selects it. Do not assume that a single housing uses one shared switched supply. Review the supplied wiring diagram and agree the startup and off states before integrating the signal with an existing controller.
Details to confirm on the order
- Catalogue dimensions
- 400*145*455(375)MM/φ254/268MM. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
