Product photographs Click to enlarge ↗
Lane control signals / 300 mm
300mm Red Cross / Green Arrow LED Lane Control Signal
300mm single-aspect, two-colour LED lane control signal. A red cross indicates stop and a green arrow indicates that the lane is open.
- Signal indication
- Two-colour red cross + green arrow
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Product reference: 1-Aspect Led Traffic Light 12 Inch(300MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Two-colour red cross + green arrow |
|---|---|
| Display / housing shape | Square housing |
| Lens design | Transparent&Flat |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 400*145*455(375)MM/φ254/268MM |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 12 Inch(300MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
Square Shape Design: Max Design Space For Larger Look Than round Shape
1-Aspect Attachable Traffic Light Body: 400*145*455(375)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 1 Aspect/Sectiont Led Traffic Light With Red Cross Green Arrow Lane Control Light, as 12 Inch(300MM)*1/301 | |
| Length: 400MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 145MM | Top bracket and bottom bracket as one set |
| Height: 455MM/375MM(No Bracket) | Detachable visior: 240MM length |
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light is one kind of is one kind of our Lane Control Signal from 100MM to 500MM traffic signal light, which inludes red cross for stop and green arrow for go in paticular traffic lane.
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light has 1 aspect only, and 2-in-1 design has 2 designs together, which means it can not only show Red Cross Lane Control Light, but also dispaly Green Arrow Lane Control Light.
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light has 2 statuses, including ed Cross Lane Control Light time for stop, and Green Arrow Lane Control Light time for go.
Selection & installation
Selection notes for this signal
Directional indication
Specify the direction of every arrow as viewed by the approaching road user, and confirm the color assigned to each indication. Similar-looking signal housings can carry different arrow layouts. For a replacement, send a front-view photograph and the movement drawing so the selected optics agree with the intended turning movement.
The catalogue identifies this version as 300 mm. Use that size as a starting point for comparing optical modules, then check the full assembly dimensions, bracket position and cable entry. Selection for a road project also depends on the applicable signal specification and site layout, not diameter alone.
Details to confirm on the order
- Catalogue dimensions
- 400*145*455(375)MM/φ254/268MM. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Arrow direction for each movement, color order and the bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Lane symbols and viewing direction
- Control interface and required indications
- Required quantity, destination and project documentation
