Product photographs Click to enlarge ↗
Round / full-ball signals / 200 mm
1-Aspect LED Traffic Light With Red Green Ball
200 mm single-aspect red and green ball traffic light. Check the display arrangement, electrical supply and controller requirements before ordering.
- Signal indication
- Red/Yellow/Green, Single Color
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Specify the color arrangement and assign each indication to the required movement in the controller schedule. Match the signal mounting, electrical version and wiring to the project design.
Product reference: 1-Aspect Led Traffic Light 8 Inch(200MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Red/Yellow/Green, Single Color |
|---|---|
| LED quantity | LED Number:126PCS/Ball |
| Display / housing shape | Round With Ball |
| Lens design | Transparent&Flat/Cobweb&Curved |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 270*110*375(270)MM/184+200MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 8 Inch(200MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Section Detachable Traffic Signal Light Body: 270*110*650(550)MM
| 1 Aspect/Section Led Traffic Light With Red Green Ball, as 8 Inch(200MM)*1/201 | |
| Length: 270MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 110MM | Top bracket and bottom bracket as one set |
| Height with bracket: 650MM | Detachable visior: 155MM length |
1 Aspect/Section LED traffic Light With Red Green Ball, as 8 Inch(200MM)*1/201 is one kind of our Traffic Signal Light Series, which also includes 200MM Arrow Traffic Signal Light, both are used to remind any driver and pedestrian to go or stop on road.
200MM(8 Inch) 1-Aspect Red Green Ball LED traffic Lights has only 2 statuses, including red Traffic Signal Light time for stop and green Traffic Signal Light for go.
200MM(8 Inch) 2-Aspect Red Green Ball Traffic Signal Light has multiple functions, such as parking light on any parking lot, washing light on car washing station, access light on any entrance and exist, pedestrian traffic llight on sidewalk road, as well as racing light on racking track.
Selection & installation
Selection notes for this signal
Round indication and movement assignment
Assign each round indication to the required movement in the controller schedule. Confirm the color order and mounting orientation on the assembly drawing, especially where a replacement must align with an existing signal head. The lamp arrangement should follow the project design; the product name alone does not define the permitted traffic movement.
Single-aspect wiring
Where several colors share one aspect, confirm the connection for each color and how the controller selects it. Do not assume that a single housing uses one shared switched supply. Review the supplied wiring diagram and agree the startup and off states before integrating the signal with an existing controller.
Details to confirm on the order
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Symbol or color order, mounting direction and bracket interface.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Color order and signal arrangement
- Mounting interface and controller wiring
- Required quantity, destination and project documentation
