Product photographs Click to enlarge ↗
Lane control signals / 400 mm
1-Aspect LED Traffic Light With Red Cross Green Arrow Lane Control Signal
1-aspect red cross and green arrow LED lane-control signal for controlled lanes, tolling, tunnels and traffic-management applications.
- Signal indication
- 2-In-1 Red Cross+Green Arrow
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Product reference: 1-Aspect Led Traffic Light 16 Inch(400MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | 2-In-1 Red Cross+Green Arrow |
|---|---|
| LED quantity | 105PCS/R+108PCS/G |
| Display / housing shape | Square With Cross+Arrow |
| Lens design | Transparent&Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 490*160*555(475)MM/φ400+338/355MM |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 16 Inch(400MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
Red Cross and Green Arrow Lane Control Signal: Product Guide for Project Buyers
This single-aspect lane control signal communicates whether a lane is open or closed by means of a green arrow and red cross display. It supports safer lane allocation where drivers need a simple, high-contrast instruction before entering a managed lane.
What to Define Before Configuration
- Define the exact symbol orientation and whether the green arrow must point downward or in a project-specific direction.
- Coordinate the display logic with the lane controller, PLC or traffic signal controller.
- Choose the mounting position so the sign is visible before the point where a driver must select a lane.
- Review environmental exposure, cable containment and maintenance access at the installation height.
Typical Project Applications
This solution is commonly considered for:
- Toll plazas and controlled-payment lanes
- Parking garages with reversible or restricted lanes
- Tunnel portals, bridge approaches and managed road lanes
Configuration and Integration Review
To avoid mismatched equipment at installation, confirm the following items with the project drawing and electrical schedule:
- Lane-by-lane operating logic and fail-safe state
- Controller interface, voltage and communication method
- Overhead, gantry or wall mounting arrangement
- Quantity by lane plus spare-unit requirement
The final electrical, optical, mechanical and environmental requirements should be confirmed against the approved project specification before production. This helps ensure that the supplied equipment, mounting parts and control interfaces align with the intended application.
Installation, Commissioning and Maintenance
Installation should be completed by qualified personnel following the site safety plan and local regulations. Before commissioning, check mounting security, cable protection, power isolation, controller logic and visibility from the intended approach. Record the final configuration and keep the wiring and inspection information available for future maintenance.
Questions Buyers Commonly Ask
What happens when a lane is temporarily closed?
The project control logic should command the red-cross state and provide the appropriate upstream warning signs or markings.
Can the signal be linked to a barrier or toll system?
It can be planned with the site control system when the interface, power source and operating sequence are defined.
What information is needed for a quotation?
Send the lane layout, number of lanes, display symbols, mounting method and required controller connection.
Request a Project-Based Recommendation
For an accurate quotation, send the application description, site drawing, required quantity, preferred delivery location and any controller or mounting requirements. Our team can review the configuration before you place the order.
Original Product Information
Square Shape Design: Max Design Space For Larger Look Than round Shape
1-Aspect Attachable Traffic Light Body: 490*160*555(475)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 1 Aspect/Section Led Traffic Light With Red Cross Green Arrow Lane Control Signal, as 16 Inch(400MM)*1/401 | |
| Length: 490MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 160MM | Top bracket and bottom bracket as one set |
| Height: 555MM/475MM(No Bracket) | Detachable visior: 300MM length |
1 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal is one kind of 100MM to 500MM lane control signal series, which inludes red cross for stop and green arrow for go in paticular traffic lane.
1 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal has 1 aspect only, and 2-in-1 design has 2 colors together, which means it can not only show red cross lane control signal, but also dispaly green arrow lane control signal.
1 Aspect/Section LED traffic Light With Red Cross Green Arrow Lane Control Signal has 2 statuses, including red cross lane control signal time for stop, and green arrow lane control signal time for go.
Selection & installation
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Let’s confirm the right version.
Send the product reference with these details:
- Lane symbols and viewing direction
- Control interface and required indications
- Required quantity, destination and project documentation
