Product photographs Click to enlarge ↗
Lane control signals / 400 mm
400MM Red Cross Green Arrow Lane Control Signal
400mm red cross and green arrow LED lane control signal for high-visibility managed lane and access-control applications.
- Signal indication
- 2-In-1 Red Cross+Green Arrow
- Housing material
- UV PC Plastic
- Supply options
- 12-24VDC Or 110-220VAC
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
Select the displayed lane-control symbol and its orientation to suit the lane-management plan. Agree the control interface and the defined indications before connecting the unit to the control system.
Product reference: 1-Aspect Led Traffic Light 16 Inch(400MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | 2-In-1 Red Cross+Green Arrow |
|---|---|
| LED quantity | 105PCS/R+108PCS/G |
| Display / housing shape | Round With Cross+Arrow |
| Lens design | Transparent&Flat |
| Wavelength | 630±5nm(R), 590±5nm(Y), 505±5nm(G) |
| Light source | 5MM Diameter LED |
Electrical & control
| Supply options | 12-24VDC Or 110-220VAC |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Lamp |
Housing & installation
| Dimensions / lens reference | 490*160*555(475)MM/φ400+338/355MM Diameter |
|---|---|
| Housing material | UV PC Plastic |
| Module construction | UV PC Plastic & Electronics |
Options & supply
| Model / product reference | 1-Aspect Led Traffic Light 16 Inch(400MM) |
|---|---|
| Two-digit display option | Option |
| One-digit display option | Option |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
1-Aspect Attachable Traffic Light Body: 490*160*555(475)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 1 Aspect/Section Led Traffic Light With Red Cross Green Arrow Lane Control Light, as 16 Inch(400MM)*1/401 | |
| Length: 490MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 160MM | Top bracket and bottom bracket as one set |
| Height: 555MM/475MM(No Bracket) | Detachable visior: 300MM length |
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light is one kind of 100MM-500MM Diameter lane control light series, which inlude red cross for stop and green arrow for go in paticular traffic lane.
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light has 1 aspect in total, and 2-in-1 design means it not only show red cross lane control light, but also display green arrow lane control light in turn.
1-Aspect LED traffic Light With Red Cross Green Arrow Lane Control Light has 2 statuses into 1 aspect only, including Rred cross lane control light time for stop, and green arrow lane control ligh time for go.
Selection & installation
Selection notes for this signal
Lane indication and symbol orientation
Provide the exact red-cross and green-arrow arrangement required for the lane. Check the arrow direction and its alignment with the lane at the intended mounting position. A lane-control indication needs a defined control sequence and fault response; the signal head should be matched to that system rather than ordered by color alone.
The catalogue identifies this version as 400 mm. Use that size as a starting point for comparing optical modules, then check the full assembly dimensions, bracket position and cable entry. Selection for a road project also depends on the applicable signal specification and site layout, not diameter alone.
Details to confirm on the order
- Catalogue dimensions
- 490*160*555(475)MM/φ400+338/355MM Diameter. Check the drawing for the meaning of each dimension, the bracket allowance and the cable-entry position before comparing it with an existing installation.
- Electrical options shown
- 12-24VDC Or 110-220VAC. Specify the required AC or DC version in the order and match it to the supply and controller. Listed alternatives should not be treated as a single universal input.
Information for your enquiry
- Selected electrical version and the controller terminal arrangement.
- Cross and arrow orientation for the exact lane and mounting position.
- The required component scope, inspection documents and spare-part references.
Let’s confirm the right version.
Send the product reference with these details:
- Lane symbols and viewing direction
- Control interface and required indications
- Required quantity, destination and project documentation
