Product photographs Click to enlarge ↗
Signal housings / 400 mm
4-Section LED Traffic Light With PC Plastic Traffic Light Housing Body
4-Section LED traffic Light With PC Plastic Traffic Light Housing Body is one type of our 100MM to 500MM diameter traffic light housing body
- Signal indication
- Optional
- Housing material
- UV PC(Polycarbonate) plastic
- Supply options
- Optional
Tell us the required configuration and quantity. We will confirm the supplied version with your enquiry.
Configuration at a glance
A housing selection needs to match the signal module, lens and mounting arrangement. Check the enclosure dimensions, opening method and component scope before using it for a replacement or a new assembly.
Product reference: 4-Aspect Led Traffic Light 16 Inch(400MM). Use the photographs and the specification groups below to compare this configuration with your project requirements.
Where AC and DC supply options are listed, specify the required version when ordering. These are configuration alternatives; do not assume one unit accepts every listed supply.
Product specifications
References for the listed configuration. Confirm the final drawing and electrical version before ordering.
Display & optics
| Signal indication | Optional |
|---|---|
| LED quantity | Optional |
| Display / housing shape | Round |
| Lens design | Optional |
| Wavelength | Optional |
| Light source | Optional |
Electrical & control
| Supply options | Optional |
|---|---|
| Power factor | ≥0.85 @ 25℃ |
| Power consumption | ＜3W Per Module |
Housing & installation
| Dimensions / lens reference | 490*160*1980/1900MM++φ338/335MM Diameter |
|---|---|
| Housing material | UV PC(Polycarbonate) plastic |
| Module construction | Optional |
Options & supply
| Model / product reference | 4-Aspect Led Traffic Light 16 Inch(400MM) |
|---|---|
| Two-digit display option | Optional |
| One-digit display option | Optional |
| Warranty reference | 5 Years |
A closer look
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
4-Aspect Attachable PC(Polycarbonate) Traffic Light Body: 490*160*1980/1900MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
| 4 Aspects/Sections Led Traffic Light With PC Plastic Traffic Light Housing Body, as 16 Inch(400MM)*4/404 | |
| Length: 490MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 160MM | Top bracket and bottom bracket as one set |
| Height: 1980/1900MM(No Bracket) | Detachable visior: 300MM length |
This product is one type of our 100MM to 500MM diameter traffic light housing body, which is the outer part of whole traffic light, this part and its inner part of traffic light LED modules together make a whole set.
This product has 4 sections in total, and each section can hold one LED module as required for making the whole traffic light as a whole set.
This product has its own addable and detachable design, that means it can be easily added to be 4 or more sections by placing long bolts and nuts through the connecting parts, and vice versa.
This product has 2 standard accessories, inluding 1 set of metal steel brackets and 1 piece of PC plastic visors. Top bracket and bottom bracket are considered as one set for installing into a traffic light pole. Each visor is fixed into the front of each traffic light body, providing a better viewing angle for any driver and pedestrian on road.
Selection & installation
Housing assembly and component fit
Choose the housing around the optical modules and mounting arrangement that will be installed in it. Check the usable module opening, internal depth, cable routing and access for closing or servicing the body. A housing with the same nominal signal size may still use different fixing points, sealing parts or brackets.
Confirm whether the quotation covers the empty body or an assembly with lenses, visors, gaskets and mounting hardware. If the project replaces an existing housing, provide its module dimensions and bracket drawing. Review the complete assembly and installation requirements together rather than treating the material name as proof of the finished signal’s performance.
This listing identifies a PC plastic body. Confirm the material and finish in the order together with the visor, fastener and seal details. For outdoor installation, request the project-relevant evidence for the complete assembly; housing material by itself does not confirm sealing or service conditions.
Confirm the supplied version
Use the product photograph and requested function to obtain a matching drawing and connection diagram. Agree the supplied components and their installation interfaces before confirming the order. Where a replacement is required, include the existing product label and measurements so that the supplier can compare the actual parts.
Information for your enquiry
- Module opening, fixing pattern and space for the wiring or driver.
- Required body sections, visor arrangement and bracket dimensions.
- Included lenses, seals, fasteners and other assembly components.
Let’s confirm the right version.
Send the product reference with these details:
- Module fit and lens interface
- Housing, visor, seal and bracket requirements
- Required quantity, destination and project documentation
