2-Aspect Led Traffic Light With Red Green Pedestrian Signal

2 Aspect/Section Led Traffic Light With Red Green Pedestrian Signal is one kind of 100MM to 500MM diametetr pedestrian signal, which includes pedestrian signal and addtional traffic light countdown timer, cautioning any pedestrian when to cross or stop at any crossing road.

Model Number:
2-Aspect Led Traffic Light 12 Inch(300MM)
Housing Body:
UV PC Plastic
LED Module:
UV PC Plastic & Electronics
LED Color:
Red Man+Dynamic Green Man
LED Number:
56PCS/R+120PCS/G
Shape:
Round/Square With Red/Green Man

Product Details

Basic Information:

Product Size:
400*145*830(750)MM/254+268MM Diameter
Lenses：
Transparent&Flat/Cobweb&Curved
Wavelength:
630±5nm(R), 590±5nm(Y), 505±5nm(G)
Input Voltage:
12-24VDC Or 110-220VAC
Light Source:
5MM Diameter LED
Communicate:
Self-Learn/RS485 Real-Time
Power Factor:
≥0.85 @ 25℃
Power Consumption:
＜3W Per Lamp

Product Details:

Transparent Lens Design: High Resolution And High Penetration For High Light Effect

2-Aspect Attachable Traffic Light Body: 400*145*830(750)MM

Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC


2 Aspect/Section Led Traffic Light With Red Green Pedestrian Signal, as 12 Inch(300MM)*2/302
Length: 400MM	Steel bracket: 125MM*145MM
Width/Thickness: 145MM	Top bracket and bottom bracket as one set
Height: 830/750MM(No Bracket)	Detachable visior: 200MM length

2 Aspect/Section Led Traffic Light With Red Green Pedestrian Signal has 2 aspects in total, and each aspect has only one color design, which means only one pedestrian signal will work in a signal time and two pedestrian signals work in turn.

2 Aspect/Section Led Traffic Light With Red Green Pedestrian Signal has 2 statuses, including red pedestrian signal time for stop, and green pedestrian signal time for go.

2 Aspect/Section Led Traffic Light With Red Green Pedestrian Signal can add an aditional traffic light countdown timer into 3 aspects, it will more clearly remind any pedetrian to stop and cross at a road by its remaining red and green time.

Selecting a 300mm red-green pedestrian signal

This two-aspect pedestrian head uses a red standing figure and a dynamic green walking figure in 300mm modules. It is intended for crossings where the pedestrian indication must remain visually distinct from nearby vehicle signals. The UV-resistant PC housing and LED modules can be supplied for 12–24V DC or 110–220V AC systems, allowing the same signal format to be specified for new intersections, controller upgrades or replacement work.

Where this pedestrian head fits

The 300mm format is a practical choice for road crossings, school approaches, station entrances and wider junctions where viewing distance is greater than a compact 200mm signal can comfortably serve. A dynamic green figure can make the permitted crossing phase easier to identify, while the separate red figure gives a clear stop indication. The final installation should still be coordinated with the local controller logic, crossing time, mounting height and applicable project standard.

What to confirm before ordering

Static or dynamic green-person display and the exact symbol required by the destination market.
Input voltage, switching logic and whether self-learning or RS485 timing is needed.
Housing orientation, bracket arrangement and the required flat or curved lens.
Whether an audible device, push button or separate countdown display will be used.

Helpful resources: Compare two-aspect signals Review 200mm, 300mm and 400mm sizing Plan wiring and installation Request a project quotation.

Related Products

led traffic light & led traffic light controller, whether it is normal power or solar power, portable or mobile, normal or solar warning traffic light, all kinds of traffic signal board, as well as light poles.