Product Details
Bascinfo:
- Product Size:
- 490*160*1030(950)MM/φ338+335MM Diameter
- Lenses：
- Transparent&Flat/Cobweb&Curved
- Wavelength:
- 630±5nm(R), 590±5nm(Y), 505±5nm(G)
- Input Voltage:
- 12-24VDC Or 110-220VAC
- Light Source:
- 5MM Diameter LED
- Communicate:
- Self-Learn/RS485 Real-Time
- Power Factor:
- ≥0.85 @ 25℃
- Power Consumption:
- ＜3W Per Lamp
Product Details:
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Aspect Attachable Traffic Light Body: 490*160*1030(950)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
 |
 |
|---|---|
| 2 Aspect/Section Led Traffic Light With Red Green Pedestrian Light, as 16 Inch(400MM)*2/402 | |
| Length: 490MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 160MM | Top bracket and bottom bracket as one set |
| Height: 1030/950MM(No Bracket) | Detachable visior: 300MM length |
2 Aspect/Section Led Traffic Light With Red Green Pedestrian Light is one kind of 100MM to 500MM diametetr pedestrian traffic light, which includes pedestrian traffic light and addtional traffic light countdown timer, cautioning any pedestrian when to cross or stop at any crossing road.
2 Aspect/Section Led Traffic Light With Red Green Pedestrian Light has 2 aspects in total, and each aspect has only one color design, which means only one pedestrian traffic light will work in a signal time and two pedestrian traffic lights work in turn.
2 Aspect/Section Led Traffic Light With Red Green Pedestrian Light has 2 statuses, including red pedestrian traffic light time for stop, and pedestrian traffic light for go.
2 Aspect/Section Led Traffic Light With Red Green Pedestrian Light can add an aditional traffic light countdown timer into 3 aspects, it will will more clearly remind any pedetrian to stop and cross at a road by its remaining red and green time.
Red and Green Pedestrian Traffic Light: Product Guide for Project Buyers
This two-aspect pedestrian signal gives people a direct visual instruction during a protected crossing phase. It is intended for projects where pedestrian movement must be coordinated with vehicle signals, crossing geometry and accessibility considerations.
What to Define Before Configuration
- Confirm the pedestrian symbol, aspect sequence and visibility requirements required by the local authority.
- Place the signal where it can be read from the waiting area without obstructing the walkway.
- Coordinate the signal timing with vehicle phases, push buttons, audible devices or countdown units when required.
- Plan the pole height, bracket direction and cable route around kerbs, ramps and tactile paving.
Typical Project Applications
This solution is commonly considered for:
- Signalized crossings and mid-block pedestrian crossings
- School zones, campuses and commercial streets
- Transit stations, hospital entrances and public facilities
Configuration and Integration Review
To avoid mismatched equipment at installation, confirm the following items with the project drawing and electrical schedule:
- Crossing drawing and pedestrian signal phase timing
- Required symbols, lens size and accessibility devices
- Pole or side-of-road mounting arrangement
- Controller output and cable-routing schedule
The final electrical, optical, mechanical and environmental requirements should be confirmed against the approved project specification before production. This helps ensure that the supplied equipment, mounting parts and control interfaces align with the intended application.
Installation, Commissioning and Maintenance
Installation should be completed by qualified personnel following the site safety plan and local regulations. Before commissioning, check mounting security, cable protection, power isolation, controller logic and visibility from the intended approach. Record the final configuration and keep the wiring and inspection information available for future maintenance.
Questions Buyers Commonly Ask
Can this signal be used with a pedestrian push button?
Yes, when the controller logic and all field devices are specified as part of the crossing system.
How should the signal be positioned?
It should be visible from the waiting position and aligned with the intended crossing direction under the site design.
Can a countdown display be added?
A countdown device can be reviewed where the project specification and controller outputs support it.
Request a Project-Based Recommendation
For an accurate quotation, send the application description, site drawing, required quantity, preferred delivery location and any controller or mounting requirements. Our team can review the configuration before you place the order.
Related Products
led traffic light & led traffic light controller, whether it is normal power or solar power, portable or mobile, normal or solar warning traffic light, all kinds of traffic signal board, as well as light poles.
2-Aspect Led Traffic Light With Red Green Crossing Light
2-Aspect Led Traffic Light With Red Green Pedestrian Light
2-Aspect Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer
2-Aspect Led Traffic Light With Red Green Bicycle Signal Countdown Timer
2-Section Aluminum Traffic Light Body
2-Aspect Led Traffic Light With RYG Ball Traffic Light Semaphore Countdown Timer
2-Aspect Pedestrian Traffic Light Red Green With Zebra Crossing Traffic Light
2-Aspect Led Traffic Light With Red Green Pedestrian Signal