Product Details
Bascinfo:
- Product Size:
- 490*160*1030(950)MM/φ338+335MM Diameter
- Lenses：
- Transparent&Flat/Cobweb&Curved
- Wavelength:
- 630±5nm(R), 590±5nm(Y), 505±5nm(G)
- Input Voltage:
- 12-24VDC Or 110-220VAC
- Light Source:
- 5MM Diameter LED
- Communicate:
- Self-Learn/RS485 Real-Time
- Power Factor:
- ≥0.85 @ 25℃
- Power Consumption:
- ＜3W Per Lamp
Product Details:
Transparent Lens Design: High Resolution And High Penetration For High Light Effect
2-Aspect Attachable Traffic Light Body: 490*160*1030(950)MM
Customizable Traffic Light Optics：Customize Your Voltage From 12-24VDC And 110-220VAC
 |
 |
|---|---|
| 2 Aspect/Section Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer, as 16 Inch(400MM)*2/402 | |
| Length: 490MM | Steel bracket: 125MM*145MM |
| Width/Thickness: 160MM | Top bracket and bottom bracket as one set |
| Height: 1030/950MM(No Bracket) | Detachable visior: 300MM length |
2 Aspect/Section Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer is one kind of our 100MM to 500MM vehicle traffic light system, which often has vehicle traffic light and countdown timer as a whole set, reminding any driver when to go or stop for any crossing.
2 Aspect/Section Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer has 2 aspects in total, and each aspect has 3-In-1 color design, which means three colors will work in turn according to traffic light rules.
2 Aspect/Section Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer has 3 statuses, including red vehicle traffic light time for stop, yellow vehicle traffic light time for caution and green vehicle traffic light for go.
2 Aspect/Section Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer has its own traffic light countdown timer, it will will more clearly remind any driver to stop and go at a road by its remaining red, yellow and green time.
Three-Colour Arrow Signal with Countdown Timer: Product Guide for Project Buyers
This directional arrow signal combines movement guidance with a countdown display to help road users understand a controlled phase. It is suited to junctions where turn movements, lane positioning and remaining phase time need to be communicated clearly.
What to Define Before Configuration
- Confirm the arrow direction for each approach and whether the display is dedicated to left, right or straight movements.
- Coordinate the countdown sequence with the controller timing plan; the displayed value must follow the programmed phase.
- Review the viewing angle, mounting height and approach distance for vehicles in the relevant lane.
- Specify the controller interface and wiring schedule with the order to avoid on-site adaptation.
Typical Project Applications
This solution is commonly considered for:
- Dedicated turn lanes at urban intersections
- Complex junction upgrades and multi-lane approaches
- Temporary diversions and traffic-management projects
Configuration and Integration Review
To avoid mismatched equipment at installation, confirm the following items with the project drawing and electrical schedule:
- Arrow direction and aspect layout by approach
- Countdown operating range and controller phase timing
- Power supply, cabinet connection and cable schedule
- Mounting hardware and site viewing-distance requirements
The final electrical, optical, mechanical and environmental requirements should be confirmed against the approved project specification before production. This helps ensure that the supplied equipment, mounting parts and control interfaces align with the intended application.
Installation, Commissioning and Maintenance
Installation should be completed by qualified personnel following the site safety plan and local regulations. Before commissioning, check mounting security, cable protection, power isolation, controller logic and visibility from the intended approach. Record the final configuration and keep the wiring and inspection information available for future maintenance.
Questions Buyers Commonly Ask
Does the timer operate independently of the controller?
The countdown should be coordinated with the traffic controller timing plan so the displayed information follows the authorised phase.
Which arrow direction should be selected?
Use the approved lane layout and signal design. Each movement should have a clear, unambiguous indication.
Can this product be included in a full intersection supply?
Yes. Provide the signal schedule and layout for a coordinated equipment recommendation.
Request a Project-Based Recommendation
For an accurate quotation, send the application description, site drawing, required quantity, preferred delivery location and any controller or mounting requirements. Our team can review the configuration before you place the order.
Related Products
led traffic light & led traffic light controller, whether it is normal power or solar power, portable or mobile, normal or solar warning traffic light, all kinds of traffic signal board, as well as light poles.
2-Aspect Led Traffic Light With Red Green Crossing Light
2-Aspect Led Traffic Light With Red Green Pedestrian Light
2-Aspect Led Traffic Light With 3-Color Arrow Traffic Signal Countdown Timer
2-Aspect Led Traffic Light With Red Green Bicycle Signal Countdown Timer
2-Section Aluminum Traffic Light Body
2-Aspect Led Traffic Light With RYG Ball Traffic Light Semaphore Countdown Timer
2-Aspect Pedestrian Traffic Light Red Green With Zebra Crossing Traffic Light
2-Aspect Led Traffic Light With Red Green Pedestrian Signal